Nickel alloy plate

nickel alloy plate

A nickel alloy plate is a non-ferrous metal with superior strength and toughness. The Nickel Alloy Plate can be alloyed with different alloys like chromium, molybdenum, and other specifications. The Pure Nickel Plate has good corrosion resistance properties across harsh environments. These plates work well in higher temperature conditions and have unique properties. A Nickel Clad Plate has a melting point of 1453 degrees C and a boiling point of 2730 degrees C. The plates have a density of 8.9 g/cm3 and have a young modulus of 200 GPa.

ASTM B162 Nickel Chequered Plate has good mechanical properties that allow it to withstand different conditions. These plates have a Vickers hardness of 638and can be processed in either or cold rolling procedures. A Nickel Hot Rolled Plate is processed at extreme temperatures till they reach its recrystallization limit. This allows the plates to have excellent workability and formability. The Nickel Cold Rolled Plate is processed at room temperature soon after the hot rolling process. Here the plate has a superior surface finish and excellent tolerances in different conditions.

Verified Supplier

Verified Stockists (Contact directly for instant quote)

available 5 cars

Find nickel alloy sheet suppliers in UAE and determine whether they are expensive or not.

Complete information for pure nickel sheet grade

Note: Below information is taken from trusted resourse

Nickel Plate Grades ASTM AMS WNR Temprature Strength Nickel content Lifespan
Nickel 200
  • ASTM B162
  • ASME SB-162
AMS 5553 WNR 2.4066
  • 600ºF
  • 315ºC
  • Yeild: 148 MPa
  • Tensile: 462 MPa
99.6% 25 to 35 years
Nickel 201
  • ASTM B162
  • ASME SB-162
AMS 5553 WNR 2.4061 or 2.4068
  • 1250ºF
  • 677ºC
  • Yeild:103 MPa
  • Tensile: 403 MPa
99.6% 25 to 35 years
Monel 400
  • ASTM B127
  • ASME SB127
AMS 4544 WNR 2.4360
  • 1000°F
  • 538°C
  • Yeild: 172-345 MPa
  • Tensile: 517-620 MPa
66.5% 25 to 35 years
Monel k500
  • ASTM B127
  • ASME SB127
WNR  2.4375
  • 1600°F
  • 870°C
  • Yeild: 690 MPa
  • Tensile: 965 MPa
63% 25 to 35 years
Inconel 600
  • ASTM B168
  • ASME SB168
AMS 5540 WNR 2.4816
  • 1900 – 2250°F
  • 1040 – 1230°C
  • Yeild: 172 to 345 MPa
  • Tensile: 655 MPa
72% 30 years
Inconel 601
  • ASTM B168
  • ASME SB168
AMS 5870 WNR  2.4851
  • 1600-2250°F
  • 870-1230°C
  • Yeild: 205 Mpa
  • Tensile:550 MPa
58-63% over 70 years
Inconel 625
  • ASTM B443
  • ASME SB443
AMS 5599/5869 WNR 2.4856
  • 2000°F
  • 1093°C
  • Yeild: 490 Mpa
  • Tensile: 690 MPa
58% over 50 years
Inconel 718
  • ASTM B670
  • ASME SB670
AMS 5596/5597 WNR 2.4668
  •  -253° to 1300°F
  • -423° to 705°C
  • Yeild: 725 MPa
  • Tensile: 1035 MPa
52.5% 25 to 35 years
Inconel X-750
  • ASTM B637
  • ASME SB637
AMS 5542/5598 WNR 2.4669
  • 2540-2600°F
  • 1393-1427°C
  • Yeild: 620 MPa
  • Tensile:695 MPa
70% 25 to 30 years
Incoloy 800
  • ASTM B409
  • ASME SB409
AMS 5877 WNR 1.4876
  • 1600-2250°F
  • 871-1232°C
  • Yeild: 240 Mpa
  • Tensile: 520 MPa
30-45% 25 to 35 years
Incoloy 800H
  • ASTM B409
  • ASME SB409
AMS 5871 WNR 1.4958
  • 1740 – 2190°F
  • 950 – 1200°C
  • Yeild:241 Mpa
  • Tensile:552 Mpa
30-35% 25 to 35 years
Incoloy 825
  • ASTM B424
  • ASME SB424
WNR 2.4858
  • 1600-2150°F
  • 870-1180°C
  • Yeild: 241 MPa
  • Tensile: 586 MPa
38-46% upto 30 years
Hastelloy C22
  • ASTM B575
  • ASME SB575
WNR 2.4602
  • 1121°C
  • 2050°F
  • Yeild:310 MPa
  • Tensile:690 MPa
56% 25 to 35 years
Hastelloy C276
  • ASTM B575
  • ASME SB575
WNR 2.4819
  • 2,415-2,500°F
  • 1,323-1,371°C
  • Yeild: 363 Mpa
  • Tensile:758 Mpa
57% over 30 years
Hastelloy B2
  • ASTM B333
  • ASME SB-333
WNR 2.4617
  • 2250-1800°F
  • 1232-982°C
  • Yeild:350 Mpa
  • Tensile:760 Mpa
68% 25 to 30 years
Hastelloy C4
  • ASTM B575
  • ASME SB575
WNR 2.4610
  • 1200 – 1900°F
  • 649 -1038°C
  • Yeild: 492 MPa
  • Tensile: 738 MPa
64% 25 years
Alloy 20
  • ASTM B463
  • ASME SB463
WNR 2.4660
  • 2,100 – 1,650 °F
  • 1,150 – 900 °C
  • Yeild: 300 MPa
  • Tensile: 620 MPa
32-38% 25 and 35 years

Select the Middle East importers or stockists offering the greatest deal on the nickel strip, must know the cost of pure nickel plate and nickel alloy strip for the 18650 battery

Nickel alloy plates specification gathered from various genuine suppliers

Nickel Alloy Plate Specification

For larger sizes, please contact the nickel alloy plate suppliers listed above in the United Arab Emirates.
Manufacturing size range of nickel plate/ sheet Pure nickel strip sizes Nickel alloy strip edges
  • Thickness: 1mm – 10 mm
  • Width: 10 – 2500 mm
  • Length: 2000/2500/3000 mm
  • Gauge: 0.127 – 13 mm
  • Length: upto 15 meter
  • Width: 5 to 1200 mm
  • Slit edge
  • Rolled edge
  • Deburred
Nickel alloy strip AMS Standard specification for nickel and nickel-base alloy-clad steel plate ASTM A265 nickel shim density
  • AMS 5553
  • ASTM B162
  • ASTM A265
  • 8.89 g/cm³
Pure nickel strip maximum operating temperature Nickel clad plate melting point Temperature range of ASME SB162 nickel flat shim
  • 870 – 1230°C
  • 1453°C
  • Up to 600°F
ASME SB162 nickel plate grades Hardness range of nickel alloy rolling plate Nickel sheet elongation
  • Brinell hardness: 45 – 73
  • Rockwell hardness: 168.53 BHN
  • 45%
Nickel alloy hot rolled plate surface finish classes Most common types of ASTM B162 nickel sheet Manufacturing technique of commercially pure nickel plate
  • Class A : finest finish
  • Class B: slightly less fine finish
  • Class C : most basic finish
  • Pure Nickel annealed plate
  • Nickel Alloy Strips
  • ASTM B162 Nickel Clad plate
  • Nickel Coil
  • ASME SB162 Nickel Shim sheet
  • Nickel Alloy Rolls
  • Pure Nickel Sheet
  • Nickel Alloy foils
  • ASTM B162 Nickel Plate

Above nickel alloy plate stockist produce corresponds with customer drawings, compare our cost and turnaround time with those of other nickel sheet stockists.

  • Roll forming
  • Cold rolling
  • Hot rolling
ASME SB162 nickel polished plate features Nickel alloy shim welding method Ex-stock of ASTM B162 nickel plate & sheet
  • Weldability
  • Outstanding heat resistance
  • Strength
  • Metallurgical stability
  • Corrosion resistance
  • SAW
  • SMAW (MMA)
  • GMAW (MIG/MAG)
  • PLASMA
  • GTAW (TIG)
  • VDM
  • Columbus Stainless
  • Nippon Yakin
  • Valbruna Stainless Steel
  • Outokumpu
  • Special Metals (SMC)
  • HAYNES International
  • ATI

Looking for nickel plate price? Contact verified nickel plate suppliers for ex-stock & buy material at dealer & distributor price in Saudi Arabia, Qatar, Oman & Bahrain

Nickel plate marking ASTM B162 nickel sheet finish Pure nickel strip applications
  • Manufacturer logo / name
  • Material grade
  • Sizes
  • Origin of material
  • ASTM/ ASME standard
  • Manufacturing date
  • Brushed
  • Glossy
  • Electroless nickel plating
  • Sandblasted
  • Mirror
  • Matte
  • Vessels
  • Heat exchangers
  • Valves
  • Marine engineering
  • Petrochemical
  • Hydrocarbon
  • Food processing
  • Oil and gas

The nickel alloy plate suppliers listed above have ex-stock and supplied to numerous nations in the past, such as Saudi Arabia, Egypt, Middle East, South Africa, United States, and Oman.

Modulus of elasticity of nickel alloy shim ASME SB162 nickel coil coefficient of thermal expansion Nickel clad plate velocity
  • 205 GPa
  • 100°C to 1200°C
  • Up to 170 HV
ASTM B162 nickel hot rolled coil common trade names Nickel alloy plate welding electrode Other industry standards SB162 nickel sheet
  • Hastelloy
  • Incoloy
  • Inconel
  • Nicrofer
  • Nimonic
  • Nickel welding electrode 141
  • EN 10204
  • RR SABRe Edition 2
  • DFARS Compliant
  • PWA LCS
  • GE Aircraft Engine (GT193)
  • EN 2.4856
  • EMS95377
  • GE Aviation S-SPEC-35 AeDMS S-400
Nickel alloy sheet method of cutting Certification of ASTM B162 nickel rolling plate Nickel sheet value added services
  • Oxy-propane flame cutting
  • Plasma cutting
  • Waterjet cutting
  • Laser cutting

Direct contact with the above nickel alloy plate distributors, dealers, and stockists specified for the above-mentioned cuts

 

  • Certificate of Origin legalized
  • 100% Radiography Test Report
  • Third Party Inspection Report
  • Raw Materials Certificate
  • EN 10204/3.1B
  • Mechanical processing
  • Blanking
  • Edge preparation
  • Sawing
  • Shearing
  • Slitting
  • Welding
  • Cutting to length
  • Polishing
  • Bending

Use chat or email options to get in direct contact with listed nickel alloy plate stockists, stockholders, and distributors for these services.

 

ASME SB162 nickel cold rolled plate packaging Nickel alloy rolling plate testing requirements ASTM B162 nickel flat shim hardness type
  • Bubble wraps
  • Wooden Pallets
  • Steel Strips Bundled
  • Customized Pallets
  • Non destructive test pmi test
  • Destructive test
  • Nabl approved lab test
  • Third party inspection test
  • Visual inspection test
  • Mechanical test
  • Flaring Test
  • Chemical test
  • Half Hard
  • Soft
  • Hard
  • Quarter Hard
  • Spring Hard
ASTM B162 nickel shim processing ASME SB162 nickel plate characteristics Electrical conductivity of nickel alloy rolling sheet
  • Edging
  • Deburring
  • Precision Rerolling
  • Boring
  • Heat Treating
  • Leveling
  • Grinding
  • Trepanning
  • Resilient
  • Highly resistant to fatigue cracking
  • Thermal distortion
  • Durable material that can withstand harsh operating
  • 50-70µΩ cm
Difference between nickel plate, sheet & Foil Pure nickel clad plate documentation offered Nickel hot rolled plate delivery time
  • Ni Sheet: 0.5mm upto 600 thick
  • Ni Foil: less than 0.2mm thick
  • Ni Plate: 600 or thicker
  • Bill of Lading
  • Country of Origin Certificate (Original)
  • Copy of Packing List indicating details of Sizes, quantity, weight, thickness etc.
  • Manufacturer’s Mill Test Certificate certifying, Heat No, finish, Chemical Composition, Grade etc.,
  • Copy of Invoice
  • Generally it is 7-10 days if its in stock
  • 15-20 days if its not in stock

Thickness of ASTM B162 nickel clad plate

3/16″ 4.8mm
1/4″ 6.3
3/8″ 9.5
1/2″ 12.7
5/8″ 15.9
3/4″ 19
1″ 25.4
1 1/4″ 31.8
1 1/2″ 38.1
1 3/4″ 44.5
2″ 50.8
2 1/2″ 63.5
3″ 76.2

Pure nickel sheet thickness tolerance

Tolerance up to & under nominal thickness t (mm)
Width w (mm) 4.5<t <6.0 8.0<t <10.0 6.0<t <8.0 2.5<t <4.5 10.0<t <12.5 12.5<t <16.0 16.0<t <20.0 20.0<t <25.0 25.0<t <30.0 30<t <40.0
2700< w <3000 0.80 1.0 0.90 1.0 1.0 1.1 1.3 1.4 1.8
1200< w <1500 0.25 0.35 0.30 0.20 0.38 0.80 0.80 0.90 1.0 1.4
w < 1200 0.23 0.32 0.30 0.20 0.35 0.80 0.80 0.80 1.0 1.4
1500< w <1800 0.28 0.38 0.32 0.20 0.40 0.80 0.80 0.90 1.1 1.5
2100< w <2400 0.80 0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.5
1800< w <2100 0.30 0.40 0.36 0.20 0.45 0.80 0.80 0.90 1.1 1.5
2400< w <2700 0.80 0.80 0.80 0.80 0.90 1.0 1.1 1.3 1.7

ASME SB162 nickel flat sheet mechanical properties

Tensile strength Yield strength Elongations Melting point
450 MPa 515 MPa 45% 1453°C

Pure nickel shim equivalent material

Commercial trade name ASTM UNS code China GB EN code Unified digital code
Nickel 200 B162 N02200 2.4066
Nickel 201 B162 N02201 2.4068
Monel k500 (SMC) K500 N05500 2.4375
Monel 400 (SMC) 400 N04400 Ni68Cu28Fe 2.4360
Inconel 601(SMC) 601 N06601 1Cr23Ni60Fe13Al 2.4851 NS3103
Nicrofer 6025HT (VDM) 602 N06025 20Cr25Ni60Fe10AlY 2.4633
Inconel 600 (SMC) 600 N06600 1Cr15Ni75Fe 2.4816 NS3102
Inconel 625 (SMC) 625 N06625 0Cr20Ni65Mo10Nb4 2.4856 NS3306
Inconel 690 (SMC) 690 N06690 0Cr30Ni60Fe10 2.4642 NS3105
Inconel 617 (SMC) 617 N06617 2.4663
Hastelloy G35 (Haynes) G35 N06035 0Cr33Ni55Mo8 2.4643
Incoloy 800H (SMC) 800H N08810 1Cr20Ni32AlTi 1.4958 NS1102
Incoloy 800 (SMC) 800 N08800 0Cr20Ni32AlTi 1.4876 NS1101
Hastelloy C276 (Haynes) C276 N10276 00Cr15Ni60Mo16W5Fe5 2.4819 NS3304
Incoloy 825 (SMC) 825 N08825 0Cr21Ni42Mo3Cu2Ti 2.4858 NS1402
Hastelloy C22 (Haynes) C22 N06022 00Cr17Ni57Mo13W3 2.4602 NS3308
Hastelloy B2 (Haynes) B2 N10665 00Ni70Mo28 2.4617 NS3202
Hastelloy G30 (Haynes) G30 N06030 00Cr30Ni43Mo5.5W2.5Cu2Nb 2.4603 NS3404
Hastelloy C2000(Haynes) C2000 N06200 2.4675 NS3405
Hastelloy B3 (Haynes) B3 N10675 00Mo28Ni65Fe1.5Cr1.5 2.46 NS3203
Sanicro 28 alloy 28 N08028 00Cr27Ni31Mo3Cu 1.4563
Nicrofer 3127hMo (VDM) alloy 31 N08031 00Cr27Ni31Mo7CuN 1.4562 NS1404
Incoloy 020 (SMC) alloy 20 N08020 0Cr20Ni35Mo3Cu3Nb 2.466 NS1403
Hastelloy G3 (Haynes) G3 N06985 00Cr22Ni48Mo7Cu2Nb 2.4619 NS3403
Inconel X750 (SMC) X750 N07750 0Cr15Ni70Ti3AlNb 2.4669 GH4145

ASTM B162 nickel hot rolled plate chemical composition

Grade Cu Ni+Co Si C Mn S Fe
Ni200 0.20 99.0 0.30 0.15 0.30 0.01 0.40
Ni201 ≤0.25 99.0 ≤0.35 ≤0.02 ≤0.35 ≤0.01 ≤0.40

Nickel Alloy Plate Properties

Types of pure nickel sheet

Nickel alloy plate

Nickel alloy plate

ASTM B162 nickel strip

ASTM B162 nickel strip

Nickel coil

Nickel coil

ASME SB162 nickel foil

ASME SB162 nickel foil

Nickel alloy rolling plate

Nickel alloy rolling plate

Pure nickel annealed plate

Pure nickel annealed plate

Nickel alloy hot-rolled plate

Nickel alloy hot-rolled plate

Nickel cold-rolled plate

Nickel cold-rolled plate

ASTM B162 nickel shim stock

ASTM B162 nickel shim stock

Gauge chart of nickel cold rolled plate

Gauge Nickel
Gauge Decimal (inches)
30 0.0125
26 0.0187
24 0.0250
22 0.0312
20 0.0375
18 0.0500
16 0.0625
14 0.0781
12 0.1094
11 0.1250
10 0.1406
9 0.1562
8 0.1719

ASME SB162 nickel coil tolerances on length

Nominal length (mm) 2,000 < L < 8,000 L < 2,000 L > 8,000
Tolerance(mm) Plus 0.005 times L 10 40
Minus 0 0 0

Pure nickel plate tolerances on width

Tolerance (mm)
Nominal length (mm) 1200 < w  < 1500 w < 1200 w > 1500
Trimmed edge Plus 5 3 5
Minus 0 0 0
Mill edge Plus 20 20 20
Minus 0 0 0

Size chart of nickel rolling sheet

Nickel plate stocked sizes
Size (in mm) Size (in inches)
3.40 0.134
3.18 0.125
4.75 0.187
3.96 0.156
7.92 0.312
6.35 0.250
12.7 0.500
9.53 0.375
15.9 0.600
22.2 0.875
19.1 0.750
25.4 1
76.2 3
31.8 1.250
28.6 1.125
38.1 1.500
50.8 2
44.5 1.750
63.5 2.500

Nickel alloy plate hs code

Material HS code
Nickel alloy plate 75062000

ASTM B162 nickel plate weight chart

Gauge Nickel
Weight (lb/ft2)
30
26 0.756
24 1.008
22 1.26
20 1.512
18 2.016
16 2.52
14 3.15
12 4.41
11 5.04
10 5.67
9
8 6.93

Pure nickel strip dimension

KG P/M2 4.5 6.3 8.1 10.8 14.4 18.0 27.0 28.0
Dimension (mm) 0.5 X 1000 X 2000 0.7 X 1219 X 3048 0.9 X 1219 X 3048 1.2 X 1219 X 3048 1.6 X 1200 X 3048 2.0 X 1219 X 3048 3 X 1200 X 3000 3.18 X VARIOUS ANN

Delivery Location and schedule for nickel hot rolled plate

Note: below table is published based on data collected by genuine suppliers, stockists & distributors

Export to Price variations and estimated delivery
South Africa  5 % extra | 25 to 30 days
Saudi Arabia  5 % extra | 3-5 days
Egypt  5 % extra | 18 days
Nigeria  5 % extra | 30 days
Kenya  5 % extra | 19 days
Yemen  5 % extra | 21 days
Norway  5 % extra | 45 days
Qatar  5 % extra | 3-5 days
Jordan  5 % extra | 21 days
Cyprus  5 % extra | 45 days
Algeria  5 % extra | 45 days
Oman  5 % extra | 3-5 days
Angola  5 % extra | 45 days
Sudan  5 % extra | 30 days
Equatorial Guinea  5 % extra | 45 to 60 days
The Republic Of Congo  5 % extra | 45 to 60 days
Gabon  5 % extra | 45 to 60 days

nickel alloy plate

Get pure nickel sheet, perforated sheet and coil traders in unparalleled width and thickness and complete sample retention; also, have a look at the hardness

An electroless nickel specification has a hardness of 63 Rockwell C.
Nickel plating is utilized to give a traditional look. Pure Nickel Strip steel plating is expensive; however, it is less expensive compared to electroplating and chrome plating.
The nickel plate price is based on the type of electroless nickel bath matrix specification. Nickel Alloy Silver Plated grade can cost anywhere between $1 to $25 per mil-ft2 based on its bath matrix.

A cut-to-length service is provided by a lot of pure nickel alloy sheet metal distributors in Dubai compliance with standards, review nickel sheet metal buying tips

A pure nickel strip can be purchased from different vendors across different countries. The Nickel Battery Strip should be purchased from certified vendors who provide all test certifications and the best material.

Before making a purchase, compare the pricing of brushed/ pure nickel strips and foil from two or more reliable suppliers in GCC. Check nickel alloy sheet metal size range

The nickel strip is primarily used for battery welding procedures. An 18650 Nickel Strip has a thickness between 0.2mm to 0.5mm. These strips have lengths up to 30mm and widths up to 6mm.

Searching for the best price of nickel alloy plates in the Middle East ? Check below grades of nickel alloy sheet and verified stockists in the UAE and India