

No slam swing and wafer check valve suppliers in UAE
Is dual plate check valve non slam type?
Non slam axial check valve are check valves that have an internal mechanism that does not allow the flow of liquid to stop abruptly, but allows it to slowly decrease. These types of check valves are used in industrial pipelines where there is a need for a certain flow until a certain point. The non-slam check valve has a low-pressure drop, so it does not lead to any problems in the system. The most common application of non-slam check valves is in the water supply piping. For example, a town or city will have a central water supply that is fed to all the houses. Water from this main source is then divided into smaller pipes that go to each house. The water pressure in these pipes ranges from 3-5 bars. So, if a leak occurs in one of these pipes, the main supplier will notice it immediately. The main source of water for each house is controlled by an Axial flow non slam check valve.
Axial flow non slam check valve available in many end connections such as buttweld or socket weld, flanged or threaded
How does a non slam axial check valve work?
It is very important for the No slam check valves to be installed correctly, so the pressure does not create any damage. This is where the non-slam axial check valve comes into play. It has a unique design where the valve body is placed inside the flexible tubing. This makes the Non slam wafer check valve in a closed position when there is no pressure on the other end of the line. When there is pressure on the other end, it causes the valve to open and allows the water to flow.
Non slam wafer check valve with leakage testing as per API-598 in Sharjah, non slam type swing check valve available in standard and custom sizes
When would you use a non slam type swing check valve?
If you want to use the Non slam wafer type check valve type, you will have to place it between the source of the water and the tap where the customer will use it. This is the only way you will be able to turn the valve on and off using the tap. In this case, the water will come out of the valve and then flow into a flexible tube. It is important to remember that the Non slam type swing check valve will only work correctly if the water pressure is constant. If you have a river that has a high amount of water flowing into it, the valves will not close. They will only close when it is a slow day. If you use a garden hose to water the lawn, the swing check valve will not work. It will only work for a certain amount of water that comes out of the source.
Buy non slam swing check valves at affordable prices from certified no slam check valves suppliers in the middle east countries
How much pressure is needed to open a no slam check valve?
The pressure required to open a Non slam spring assisted check valve will depend on the type of valve and the location. The standard valve will open as soon as there is low pressure. The non-slam valve will open at a certain pressure, which will be different for each location. For example, in a water supply line, you want to open the valve when there is no pressure at all. Then, the non slam swing check valve will close again when there is a certain pressure in the line. Normally, this will be a few bars more than the initial pressure. It is important to note that the valve will not work properly if there is too much pressure in the line.
Are you looking for non slam axial check valve dealers in GCC countries? Find very few but genuine stockist of non slam wafer check valve who offers various sizes at the cheapest price in Dubai
How much pressure is needed to open a non slam wafer check valve?
To open a non-slam wafer check valve, you need a certain amount of pressure in the line. The wafer type non slam check valve will only work when this pressure is reached. The amount of pressure required depends on the location, but a few bars more than the initial pressure is recommended. In a water supply line, the pressure should be around 5 bars and in a water drain, the pressure should be around 0.5 bars. The reason for this is simple. As mentioned above, the non-slam wafer check valve has a unique design. It has a body inside the line, so even when the valve is open, the pressure is always in the same place. With a standard wafer check valve, the pressure will be in the line and in the valve.