SA 213 t5 tube

SA 213 t5 tube

Ferritic SA 213 is a substance utilized in high-temperature and tension systems. Four to six percent chromium, four to five percent molybdenum, and three to six percent manganese. All these elements make up the bulk of the ASTM A213 T5 Seamless Tube. They also contain trace amounts of Si, C, P, And S in addition to these other elements. The T5 tube material is made up of corrosion-resistant components that shield T5 tubing from atmospheric corrosion. these tubes are durable and simple to repair. The Alloy Steel T5 Boiler Tube has superior mechanical qualities. They have an elastic modulus of at least 207Mpa and a tensile strength of at least 414Mpa

Verified Supplier

Locate a few reliable suppliers of ASTM a213 t5 seamless tube in UAE, and check the difference between sa 213 gr t5 vs t11 tubing

SA 213 T5 Tube specification


SA 213 T5 Tube Specification

SA 213 T5 Tube size range SA213 T5 high temperature tube length A213 T5 Tubing equivalent & other trade name
  • Nominal pipe size – 1/8” to 5” NPS
  • Wall thickness: 0.500″

Not found your specific sizes in UAE? Check ex-stock with above SA 213 T5 Tube suppliers & get a quick quote

  • 6 meters
  • 12 meters
  • Single random lengths (4 – 8 meters)
  • Double random lengths (8 – 13 meters)
  • Custom length or cut to length to save wastage
  • DIN 1.7362
  • UNS K41545
  • Heater Tube – ASTM A213 Gr T5
  • Trade Name: SA 213 T5 Tube
A213 T5 material SA 213 Gr T5 hot formed tubes tempering temperature SA 213 T5 Heat Exchanger Tube condition of delivery
  • Alloy Steel T5
  • Chrome Moly Alloy T5
  • up to 1,000°C
  • Hard finish/ Cold-finished T5 Boiler Tube – BK
  • Soft/ Cold-finished SA213 T5 Superheater Tubes – BKW
  • Annealed ASTM A213 T5 Seamless Tube – GBK
  • Normalized A213 T5 heater tube – NBK
Manufacturing method of UNS K41545 seamless tube ASTM A213 Gr T5 IBR Tube required quality test SA213 T5 Superheater Tubes applications & uses
  • Cold drawn seamless SA 213 T5 tube
  • Hot finished seamless T5 Steel tube

Above SA 213 T5 Tube suppliers have successfully supplied to Qatar, Oman, Saudi Arabia, UAE, Egypt and many other countries with ZERO rejection rate

  • Flattening test
  • Hydrostatic Test
  • Nondestructive Electric Test
  • Hardness test
  • Tensile mechanical test
  • Bend Test

Listed SA 213 T5 Tube suppliers are specialized of A213 T5 material, buy with IBR certificate & MTC EN 10204 3.1 Middle east countries

  • HVAC heat exchanger
  • Fertilizer industry
  • Power Generation Industry
  • Chemical Industries
  • Oil and gas Industries
  • Automotive Industry
  • Petrochemical Industries
  • Superheated pipelines
European standard of ASTM A213 T5 seamless ferritic alloy tubes ASME SA213 T5 Seamless Tubing approved ex-stock Heat treatment methods of T5 Steel Cold Drawn Tube
  • EN 10216-2 (ASTM A213 Gr T5 seamless boiler tubing)
  • EN 10217-2 (SA213 T5 welded tube)

Above listed ASTM A213 T5 Seamless Tube suppliers offer ex-stock in in middle east with the following approvals

  • ADNOC
  • PDO
  • Petronas
  • Petrobras
  • Pemex
  • KOC
  • Saudi Aramco
  • PDVSA
  • Qatar Gas
  • Annealing
  • Acid cleaning
  • Spray rust removal
  • Quenching
  • Cleaning
  • Tempering

Find a trustworthy Middle East importer who provides alloy steel t5 boiler tube with mill tc at the lowest cost. View t5 tube material temperature range

Comparison of A213 T5 Hot Finished Tube with other material

Elements SA 213 T5 Tube ASME SA556 A2
Chromium / chrome (Cr) 4.00-6.00
Molybdenum/ Moly (Mo) 0.45-0.65
Phosphorus (p) 0.025 ≤0.035
Sulfur (S) 0.025 ≤0.035
Silicon (Si) 0.50
Carbon (C) 0.15 ≤0.18
Manganese (Mn) 0.30-0.60 0.27-0.63
Yield strength 205 MPa 180 MPa
Tensile strength 415 MPa 320 MPa
Temperature range up to 1,000°C Upto 640°C

SA 213 T5 Tube Properties

Mill tolerance for hot formed SA 213 Gr T5 tubes wall thickness

ASTM A213 Gr T5 IBR Tube NPS or DN SA 213 T5 chrome moly tube Tolerance
( % from Specified)
Over Under
  • T5 Steel Cold Drawn Tube 1/8 NPS to ASME SA213 T5 Seamless Tubing 2 1/2 NPS inclusive
  • all t/D ratios
20.0% 12.5%
  • Above T5 Boiler Tube 2 1/2 NPS
  • t/D < or = 5%
22.5% 12.5%
  • Above SA 213 Gr T5 Tubing 2 1/2 NPS
  • t/D > 5%
15.0% 12.5%

Notes:

  • t means = Specified SA213 T5 high temperature tube wall thickness
  • D means = Specified A213 T5 Hot Finished Tube OD

Allowable or permissible variation of ASTM A213 Gr T5 boiler tube outer diameter

UNS K41545 Boiler Tube nominal pipe size
(NPS)
DN Designator Over Under
inch mm inch mm
  • 1/8 NPS A213 T5 heater tube to 1 1/2 NPS SA213 gr T5 tubing
[6–40], incl 1/64 0.40 1/64 0.40
  • Over 1 1/2 NPS A213 T5 Seamless Tube to 4 NPS SA 213 T5 Tube
[40 to 100], including 1/32 0.79 1/32 0.79
  • Over 4 NPS A213 T5 Hot Finished Tube to 8 NPS T5 Tube
[100 to 200], including 1/16 1.59 1/32 0.79
  • Over 8 NPS A213 Gr T5 IBR Tube to 12 NPS SA 213 Gr T5 Tubing
[200 to 300], including 3/32 2.38 1/32 0.79
  • Over 12 NPS SA213T5 High Pressure Tube
[300] +/- 1% of the specified SA 213 T5 chrome moly tube outside diameter

SA 213 Gr T5 Tubing Marking

Marking heading
Grade number SA 213 T5
Length of ASTM A213 T5 Seamless Tube Upto 12 meter | Custom sizes
Schedule no Sch 10 to Sch XXS
Manufacturer’s Heat Number to recognise SA 213 T5 material
Test name
  • S1 – SA 213 Gr T5 Tubing Analysis
  • S2 – SA213 T5 Superheater Tubes Transverse Tension Test
  • S3 – Flattening Test of T5 Steel Cold Drawn Tube
  • S4 – Etching Tests & Metal Structure
  • S5 – Photomicrographs
  • S6 – ASTM A213 Gr T5 IBR Tube Photomicrographs for Individual Pieces
  • S7 – Alternative Heat Treatment – required for SA 213 T91
Indicate A213 T5 Hot Finished Tube test method
  • NH – if Hydrostatic No, Nondestructive No
  • Test Pressure – if Hydrostatic yes, Nondestructive No
  • Test Pressure/NDE – if Hydrostatic yes, Nondestructive yes
  • NDE – if Hydrostatic No, Nondestructive Yes

By live-chatting with stockists of ASME sa213 t5 seamless tubing the quickest estimate can be acquired, Look at types of coating used for sa213 t5 material

Ferritic Low Alloy Steel SA 213 T5 Round Tube’s exterior coating options include galvanized, anti-corrosive oil, black paint, and other finishes as requested by the client
This coating makes it easier for ASME SA213 T5 Seamless Tubing to tolerate oxidative, corrosive, and high-temperature situations. These tubes can be ordered up to a length of 12 meters in single, double random, or bespoke sizes.
These pipes are put through a lot of testing after coating to ensure the right coating. The coating has numerous industrial and engineering applications for these pipes.

SA 213 Gr T5 Tubing and SA 213 Gr T11 Tubing both contain varying amounts of carbon. Comparatively speaking to t5 tubing, t11 tubing has less carbon. Contrary to t5 tubes, t11 tubes have a higher silicon concentration. In comparison to ASTM A213 Gr T5 IBR Tube, the t11 tube’s chromium and molybdenum content are also low
In comparison to t5 tubes, which have a tensile strength of roughly 215 MPa min, t11 tubes have a minimum tensile strength of 415 MPa. Both grades have differing hardness (HRB), with t11 having a maximum of 178 and t5 having a maximum of 163.

The extreme heat of 2000 degrees Celsius is used to roll steel to create the A213 T5 Hot Finished Tube. Hot rolling is an option for sizing these pipes approximately to 22.5 meters. In a perfect scenario, the T5 Steel Hot Drawn Pipe aids in raising the limitations of this tubing
Due to their high melting point and a high-temperature constant of thermal expansion, they are stronger in hotter environments. These are the top thermal conductors. UNS K41545 T5 Boiler Tube is related to susceptibility to stress fracture toughness, pitting, and crevice damage
Condenser & heat exchanger tubes made of seamless cold-drawn metal are known as the T5 pipe Material.

Here, you’ll only discover trustworthy traders of UNS k41545 boiler tube in Dubai who also gave certificates, read what end of a213 t5 hot finished tube ?

Both threaded and beveled ends are offered for the SA 213 T5 Heat Exchanger Tube. Also, there is a plain end option for the tubing. Large diameters are the focus of these tubes. SA213 T5 Superheater Tubes can be connected to the ends of some other narrow cavity since it has connections on either one end or perhaps both ends. When in use, it tends to be sturdy and resist numerous industries stresses and strains. The alloy is weldable using customary techniques, either with or without filler substance. The SA213 T5 material needs to be preheated & heat treated after welding to other substance tubes.

Are you having trouble finding cut-to-size sa213 t5 superheater tubes distributors for your project? purchase here and look at the sa 213 gr t5 tubing bending process

Yes, high-temperature applications such as forging, bending, and related other fabrication technique are well recognized for the T5 Steel Cold Drawn Tube. The IBR Certified SA213T5 High-Pressure Pipe could be conveniently bent or flanged and seems to have excellent forming qualities. Such pipes are utilized to move caustic liquids and fuels from one place to another. Producing this Tubing does not require welding, which is thought to be a better and more dependable procedure. For these kinds of machines, ASME SA213 T5 steel tubing as well as stainless steel tubing & pipelines are recommended. Tubing and pipelines made of A213 Grade T5 Steel should be utilized with high-efficiency industrial heaters for waste incineration.