Sa 516 grade 65 plate

sa 516 grade 65 plate

The plate has excellent weldability with strong mechanical properties. SA 516 grade 65n plate is also known as carbon steel plate due to its high toughness.

SA 516 gr.65n NACE MR 0103/0175 Steel Plate are widely used in the fabrication of pressure vessels and weldable boilers.

These plates are designed for low to moderate temperature conditions.

The plates are produced from a fine grain method and is recognized as the backbone of the pressure vessel industries.

Verified Supplier

Verified stockists and wholesalers

available 6 cars

Do you require ASTM a516 gr 65n plate suppliers in UAE from recognized mills? Compare sa 516 gr 65n vs 70n

SA 516 Grade 65 specification

Sa 516 Grade 65 Plate Specification

Thickness availability of ASTM A516 Gr 65 plate Plate A516 Gr 65 Width Length Of A516 Grade 65 boiler plate
  • 3/16″ to 6″

For custom sizes you can contact above genuine SA 516 Grade 65 suppliers in UAE

  • 48″ to 120 inch
  • 96″ to 480 inch
SA 516 Gr 65 plate temperature range Impact tested of SA 516 Gr 65 material SA 516 Gr. 65+N means
  • Min temperature : 1100 °F / 595 °C
  • Max temperature: 1300°F / 705°C
  • 52° C
  • High resistance
  • Good weldability
Heads of SA 516 Gr 65 plate Cones of A516 65 plate Shells of ASME SA 516 Grade 65 material
  • Welded head: custom sizes
  • Thickness: up to 170 mm
  • Diameter: up to 12,000 mm
  • Length : up to 192″
  • Thickness : up to 2″
  • Diameter: up to 180″
Supply conditions of SA 516 65N plate Heat treatments of A516 Gr 65 plate Application of SA 516 Gr 65 killed carbon steel plate
  • As-rolled
  • Weldable
  • HIC
  • Fine Grained
  • Normalized
  • Quenched and tempering
  • A516 Gr 65 temperature range : 595 °C to 705°C
  • LPG tank truck
  • H2S environments
  • Sour service
  • Chemicals tanks
  • Firewater
  • Manufacturing Gas Cylinder
  • Storage Tanks (Oil/ Gas/ Liquid/ Acides)
Meet standard of SA 516 Gr 65 carbon steel plate EN standard of SA 516 Gr.65 low temperature plates Testing requirements of A516 Grade 65 pressure vessel steel plates
  • GB713
  • GB3531
  • DIN 17155
  • JIS G3103
  • JIS G3115
  • BS1501-224-490A/B
  • AS 1548 (weldable)
  • NACE MR-0103
  • BS 1501
  • DIN 17155
  • NACE MR-0175
  • A20M
  • A20-85
  • USA -ASTM / ASME
  • EN 10028
  • EN10028-5
  • EN10028-3
  • EN10028-6
  • EN10028-2
  • Brinell Hardness (BHN)
  • Rockwell Hardness (RW)
  • Ultrasonic Testing (UT)
  • Simulated Post Weld Heat Treat (SPWHT)
  • Hydrogen Induced Cracking (HIC)
  • Charpy V-Notch Testing (CVN)
  • MTC EN 10204 3.1
  • MTC EN 10204 3.2
SA516 65 plates manufacturing technique Value added services of SA 516 Grade 65 plates Estimate delivery time of SA516 Gr 65 plate
  • Hot rolling
  • Normalized
  • Plasma cutting
  • Miter cuts
  • Coating
  • CNC machining
  • Finishing
  • SA 516 Gr 65N processing
  • Beveling
  • Stamping in ASTM A516 Gr 65
  • Oxy-Fuel Cutting
  • Tapping
  • Drilling
  • Coping
  • ASME SA 516 Gr 65 Flattening
  • Stretcher Leveling
  • Flame Cutting

Contact above SA 516 Grade 65 plate suppliers, dealers & stockholders for these services at best price in UAE

  • Saudi Arabia: 5-6 days
  • Oman: 2-3 days
  • UAE : 8-10 days
  • South Africa: 12- 14 days (Durban)
  • Egypt : 12-15 days

Approx shipping delivery of SA 516 Grade 65 in Oman, KSA, UAE, Egypt & South Africa

 

Receive low-cost stockists of sa 516 gr.65 nace Mr 0103/0175 steel plate in the Middle East along with top-notch customer service; you can even check application

SA 516 Gr 65N + S5 Tagging & marking

Condition Marking by SA 516 Grade 65 plate suppliers
Normalized A516 Gr65+N
Impact Tested ASTM SA 516 gr 65 +S5

 

Tensile strength of SA516 Gr 65

Description Of SA 516 Gr 65 steel ASTM A516 Grade 65
Tensile strength (ksi) 65-85
Tensile strength (MPa) 450-585

 

Density of A516 Gr 65

  • Density (×1000 kg/m3) : 7.7-8.03

 

ASTM A516 Gr 65 equivalent

SA 516 gr 65 standard Description Of SA 516 gr 65 LTCS
British Standard BS1501-224-460A/B
European Norm EN10028 P295GH
DIN Standard DIN 17155 17 MN 4
ASTM/ASME A/SA516 – Grade 65

 

ASTM A516 Grade 65 chemical composition

Composition Of SA 516 gr 65 normalized Percentage %
Ti 0.03
V 0.02
P 0.03
S 0.03
C 0.08/0.20
Si 0.4
Mn 0.9/1.5
Mo 0.08
Nb 0.01
Al 0.02
Cr 0.3
Cu 0.3
Ni 0.3

 

ASME SA516 Grade 65 mechanical properties

A516 65 Steel Description A516 Grade 65
Yield strength (MPa) 240
Yield strength (ksi) 35
Elongation in 50mm (minimum) (%) 23
Elongation in 200mm (minimum)(%) 19

 

Sa 516 Grade 65 Plate Properties

Allowable stress of A516 Grade 65 plate

Temperature *MAS
-20~100 18.6
150 18.6
200 18.6
250 18.6
300 18.6
400 18.6
500 18.6
600 17.9
650 17.3
700 16.7
750 13.9
800 11.4
850 8.7
900 5.9
950 4.0
1000 2.5

 

Most popular types of SA 516 Gr 65 plate

  • ASTM A516 gr 65N heat exchanger plate
  • SA 516 gr 65N cones
  • A516 Grade 65 PVQ welded head
  • A516 gr 65N steel shell
  • SA 516 gr 65 carbon steel saddle wear plate
  • SA 516 gr 65 sour service plate
  • A516 Grade 65 baffle plate
  • SA 516 gr 65 killed carbon steel HIC plate
  • A516 65N rolled plate
  • ASTM A516 Gr65 base plate
  • ASTM A516 Grade 65 lifting plate
  • SA 516 gr 65 HIC boiler plate
  • A516 65N plate

 

Thickness of SA 516 Grade 65 material

  • Thickness (maximum) : 205 in (MM)

 

ASTM A516 Gr 65 rolled plate processing

  • Testing
  • Forming drilling
  • Machining
  • Cutting
  • Grinding

 

Steel plate SA 516 Gr 65 elasticity modulus

  • Modulus of Elasticity : 200 GPa

 

Do you have trouble finding importers in GCC countries for customized sa 516 gr.65n nace+hic plate? Get here and also check its material standard means.

ASME SA516 Grade 65N NACE HIC Boiler Plate display excellent corrosion resistant property and prevents the materials from cracking caused by chloride and sulfide acids.

The plates work efficient in harsh environments which includes toxic chemicals, acids, salts and alkalis.

The plates are highly resistance to oxidation and prevents rusting and degradation.

ASTM A516 Grade 65N Steel Plate are also efficient in preventing erosion corrosion.

Visit pipingmaterial.ae to check out best and credible SA 516 grade 65 plate manufacturers in UAE.

It is one of most trusted B2B platform for piping materials only providing you with 100% verified and genuine limited suppliers and manufacturers who are offering you industrial standard products along with their contact details so that you can easily communicate with them and get all your queries solved.

SA 516 GR.65N NACE+HIC Plate display good fabricability and weldability properties.

The plates exhibit high tensile strength hence are widely use in the oil, gas, petrochemical, construction and chemical processing industries.

ASTM A516 Grade 65N Plate have strong yield strength and performs well even at low cryogenic temperatures.

Many of the traders provide ASME sa516 grade 65 nace hic boiler plate from the biggest manufacturers like Jindal, Posco, Aperam, Outokumpu, and others; see sa 516 gr 65n vs 60n

Grade 65n Boiler Quality Steel Plate are excellent at low to moderate temperatures.

The maximum temperature these plates can withstand is up to 4550C.

Get estimates right away from a variety of reliable distributors known for their excellent ASME sa516 grade 65n boiler quality steel plate, know more about sizes

There are two widely used destructive testing methods and it is very important as the testing makes sure the plate is perfectly designed and it adhere to the industrial standards.

Hardening- this method is used to check the level of resistance of the material to deformation and penetration. The plates are subjected to minor to heavy loads to measure the material mechanical properties such as hardness and strength.

Fracture-this method is used to check the durability and life span of the material.

Corrosion testing- this process involves checking the corrosion property of the plates.

Fatigue resistance- this method involves checking the level of resistance against heavy load or high amount of work performance.