What Is A Sanitary Solenoid Valve And How Does It Work?
An electro-mechanical valve, this device can control the flow of liquid or gas and is available in several variants including pilot-operated and direct acting. A hygienic solenoid valve consists of a coil, plunger and sleeve assembly. The device works even when it is closed because when the coil is energized – the plunger will either permit the flow of media or prevent it by opening or sealing the orifice.
Features Of Hygienic Solenoid Valve
The most prominent feature of the Tri Clamp Sanitary Solenoid Valve is that its design is compact. They permit bidirectional flow and do not require a minimum operating pressure. They are easy to clean because they are compatible with aggressive cleaning fluids.
How To Clean A Tri Clamp Sanitary Solenoid Valve?
Once the Sanitary Food Grade Solenoid Valve has been removed, place it over a material that is absorbent. Spray a MAF or mass air flow sensor cleaner over the surface of the valve. This cleaner is a chemical solution that is sprayed on sensitive parts like these to eliminate debris, dust, and dirt or even to unclog the parts. Use the straw attached to the cleaner to spray it onto the cylinder of the device. The valves need to be wiped with a dry rag. There is a high chance that the device will contain excess cleaning liquid. Extract the liquid by shaking off the valve and once again thoroughly wipe its surface.
Working Principle Of Tri Clover Solenoid Valve
The working mechanism of a sanitary solenoid valve includes its control over the flow of media in a positive, fully-open or fully-closed mode. Often, this device replaces manual valves for remote control. Its function involves opening or closing the orifice in its body. This action will permit or prevent the media from flowing through the valve. When the coil is energized, the plunger opens or closes the orifice by simply rising or going low within a sleeve tube. When the valve is closed, the plunger return spring will hold it against its orifice, thereby preventing the media from flowing. When the solenoid coil is energized, it creates a magnetic field. The magnetic behaviour, causes the plunger to rise, permitting the flow. In an open valve, the plunger seals off the orifice when the coil is energized, thus preventing the flow.
How To Fix A Leaking Sanitary Electric Solenoid Valve?
In an event of a leak, the first point to check is if the assembly has been installed correctly. If the installation is correct, the chances of leakage are reduced drastically. When foreign materials get latched onto its sealing surface, permitting the fluid to pass through in a few cycles could help reduce the leak. If after 10 cycles the leak is persistent, the valve needs to be examined by taking it apart. Ensure all surfaces are clean. If there is a cut or erosion on the disc, there is a high probability of the body being nicked or eroded. Change the disc without touching the seat. The seat of the sanitary ware faucet solenoid valve is to be lapped using the manufacturer’s instructions before installing the new disc. After the new disc has been properly lapped, seat leakage can be eliminated.
Why Use Sanitary Food Grade Solenoid Valve?
There are many benefits to using a Sanitary Electric Solenoid Valve. They have a compact design, are fast and safe switching, are highly reliable, and have a long service life. They also offer low control power. The requirement in applications that involve flow control applications, is to start or halt the flow in the circuit. This essentially controls the fluids in the system. This is why many food and beverage industries prefer an electronically operated Tri Clover Solenoid Valve. And since they are actuated, the device can be positioned in remote locations with its control simplified by the use of electrical switches.
