SS400 flange

SS400 Flange

What is a SS400 Flange?

As flanges are used in piping to fit different components together, there are different specifications. The specifications mandate the material, the pressure capacities, and the dimensions. The Ss400 flange is made up of carbon steel with silicon, carbon, phosphorus, and sulfur in addition to the iron part. The material has good tensile strength and yield strength. The minimum yield strength of the Carbon steel ss400 flanges is up to 245MPa and the tensile strength is up to 510MPa.

Verified Supplier

Verified manufacturers and stockists

available 9 cars

SS400 Flange specification, chemical composition and mechanical properties

Ss400 Flange Specification

SS400 Flange Properties

Jis 10k SS400 blind flange suppliers in UAE

How do you test a SS400 Flange before purchasing?

The tests on flanges have different components. The chemical test can be done in a laboratory while the physical tests like the tensile test have to be done in a mill environment. There are non-destructive tests for the Corrosion flange ss400 which you can demand to have a witness from your end to check. There are options for the customer to take any type of test and to have a representative present during the test. The Ss400 sorf flange can be tested by an agent of yours or the suppliers themselves as well.

Have direct contact with the verified mild steel SS400 weld neck flanges manufacturers in Dubai

What are the advantages and disadvantages of Jis 10k SS400 Blind Flange?

The advantage of having this material is its corrosion-resistant capacity. The Jis 10k ss400 flange has high corrosion resistance compared to other carbon steel grades. So the flange can last long in a corrosive environment. It is strong, tough, and can withstand high pressure and temperature. Ss400 slip on flanges or the blind flanges has to be fitted in place in the pipes. When the pipe diameter increases, the flanges become heavyweight. Lifting them, aligning the boltholes, and fitting them correctly become difficult.

Get benefits of the lowest price when buying from verified ASTM a36 carbon steel SS400 reducing flange stockists in Sharjah

what is mild steel ss400 flange temperature range?

It is not the type of flange but the material of the flange that determines the operating temperature. The Mild steel ss400 flange has a temperature range of –40to +150°C and can operate at intended conditions in that temperature range. But there are fluids that become highly corrosive with increased temperatures and other forming crystals at low temperatures. These differences can also limit the temperature range of the Astm a36 carbon steel ss400 flanges.

Different types of SS400 Flange

JIS 10k ss400 flange

JIS 10k ss400 flange

SS400 sorf flange

SS400 sorf flange

Carbon steel ss400 flanges

Carbon steel ss400 flanges

Mild steel ss400 flange

Mild steel ss400 flange

SS 400 weld neck flanges

SS 400 weld neck flanges

SS400 slip on flanges

SS400 slip on flanges

SS400 blind flanges

SS400 blind flanges

ASTM a36 carbon steel ss400 flanges

ASTM a36 carbon steel ss400 flanges

SS400 plate flange

SS400 plate flange

SS400 carbon steel flanges

SS400 carbon steel flanges

JIS ss400 threaded flange

JIS ss400 threaded flange

JIS g3101 ss400 raised face flange

JIS g3101 ss400 raised face flange

Buy all types of SS 400 weld neck flanges as per international standards. view manufacturing methods, advantages, and disadvantages

Which tests are required for Ss 400 weld neck flanges?

The usual tests on the Ss 400 weld neck flanges are the ultrasonic, hydrostatic, metallographic, tensile, yield point, and impact tests. Each of these tests is designed to measure a particular quality. The customer can opt to carry out any of these tests. Ss400 plate flange can be tested under these requirements or any other requirement deemed necessary by the customer.

Reasonably expect fair prices of ASTM a36 carbon steel SS400 plate flanges from different suppliers in the middle east and India

How does a Ss400 blind flanges?

A blind flange operates to close a pipeline. It is handy to have Ss400 blind flanges because they allow opening the line as and when needed, without having to cut the line. This is useful during cleaning operations and if the pipeline has to be extended for some reason. We can also add another component to the end of the line where the blind flange is.