Stainless steel 316Ti tube fittings

DIN 1.4571 compression fittings and SS 316Ti instrumentation fittings suppliers in UAE

Stainless steel 316Ti tube fittings

What are stainless steel 316Ti compression fittings?

The stainless steel 316Ti material can be described as a titanium stabilized version of the 316 grade stainless steel. The molybdenum bearing austenitic grade of stainless steel 316Ti compression fittings show good resistance to corrosion. They can also resist crevice corrosion compared to other stainless steel grades like 304. The stainless steel 316Ti adapter fitting have added titanium in its chemical composition- this helps to reduce the risk of losing resistance to corrosion in the heat-affected zone. The UNS S31635 gaugeable tube fitting offer better higher temperature and mechanical strength compared to the 316L ss grade. The AISI 316Ti npt tube fittings also show higher tensile strength and yield strength. The ASTM A479 316Ti connectors can be used for prolonged time in elevated temperature conditions without compromising on its corrosion resisting capabilities. The ASTM A276 316Ti pipe connectors cannot be hardened by heat treatment and it stays non-magnetic in the annealed condition.

Verified Supplier

available 10 cars

An online discovery platform for ASTM A276 316Ti pipe connectors & 316Ti stainless steel tube fittings suppliers in Middle East countries

Check type of leaks of stainless steel 316Ti tube fittings. See how to fix them?

The common leaking causes of the stainless steel 310 tube fittings are:

  • If tube fitting assembly is improperly done.
  • If the metal-to-metal seal is not proper.
  • If the selection or preparation of the tubes are improperly done.
  • If the 316Ti stainless steel instrumentation fittings do not match with the tube or other piping equipment to which it will be connected.
  • If the fitting is over tightened.

Find various manufacturers of ASTM A182 F316Ti instrumentation tube fittings to match the lower price with other suppliers in Dubai

What are the most common 316Ti stainless steel tube fitting threads and how to Identify?

The 316Ti stainless steel tube fittings comes with the following types of threads:

  • BSPP
  • BSPT
  • UN/UNF
  • Metric tapered
  • Metric parallel

To understand if the thread is tapered or parallel, one should look at the diameter of the thread. If the diameter gets thinner at the end then it is a tapered one. But if it has the same thread diameter from top to bottom, it is a parallel thread. To understand if it is a male or female thread, check the location of the thread- if located on the outer side, it is a male thread and if inside, it is a female thread.

Get quick quotes from genuine SUS 316Ti tube connectors and UNS S31635 gaugeable tube fittings manufacturers for Ultra High Pressure applications,

What are the three main parts of a 316Ti stainless steel compression fitting?

The three main parts of the 316Ti compression fittings are compression nut/screw, one or many ferrules, and there is a compression fitting body.

AISI 316Ti npt tube fittings and EN 1.4571 high pressure fittings in NPT, BSPP, BSPT, ISO, SAE thread, interchangeable with Parker, Swagelok, Ermeto, Legris, HY-LOK

What are SUS 316Ti tube connectors?

The SUS 316Ti tube connectors are modified with an inclusion of 0.5% titanium and they are capable of delivering exceptional performances. They show good resistance to general, pitting, and crevice corrosion and can be customized as per the client demands.