Stainless steel 347 flanges

Home > Stainless steel 347 flanges

ASTM A182 F347 Blind Flange and UNS S34700 Slip on Flanges Suppliers in UAE

Stainless Steel 347 Flanges Key points

Sizes in Stock :	1/2″ to 48″
Thread :	MNPT, NPT, FNPT, BSPT, BSPP
European & American Standard :	ASTM A182, ASME SA182, UNS S34700, WNR 1.4550
Class :	Class 150-2500
Schedule :	Sch 5 to XXS
Approval :	KNPC, BAPCO, SABIC, KOC, Saudi Aramco, RINA, KPI, ADNOC, Q CHEM, EIL, MA’ADEN,
Origin of Raw Material:	European, Indian, Korean, Janpanese, UK, German
Face Type:	FF, RF, RTJ
Environments :	High-pressure
Manufacturing Standards :	MSS SP44, ASME B16.5, B16.47 Series A & B
Neck Type :	Triangular, Knurled, Square, Hex
Connection :	Threaded, Welded
Service Life :	45 To 50 years
MTC	EN 10204/3.1B
RFQ:	support@pipingmaterial.ae

Table of Content

A182 F347 Flanges Specification
Ready to Dispatch Stock of SS 347 Flanges
SS 347 Lap Joint Flange
347 Stainless Steel RTJ Flange
A182 Gr F347 Reducing Flanges
347 SS Flanges
SA 182 Gr F347 Threaded Flange
ASTM A182 347 Industrial Flange
SUS 347 SORF Flange
AISI 347 Ring Type Joint Flange
SS 347 Flanges Technical Specification
Stainless steel 347 flanges faces types
ASTM A182 F347 Socket Weld Flanges Chemical Composition
Mechanical Properties of ASTM A182 GR F347 forging Flanges
ASTM A182 F347 threaded flanges Equivalent
Material Inspection Facilities in the Following Countries
SS 347 flanges Temperature Range

SA 182 F347 Forged Flanges Hardness
Manufacturing Standard of 347 SS flanges
Stainless steel 347 pipe flanges Diameter and Number of the Bolt Holes
ASTM A182 F347 flange common designation
Types of 347 stainless steel flanges
ASME SA182 F347 flanges pressure class rating
SA182 Grade F347 Slip On Flange Size chart
SS 347 Blind Flange Dimension Chart
347 Stainless Steel Blind Flanges Corrosion Resistance Temperature
ASME SA182 F347 Flanges Gasket Chart
A182 F347 Flanges Machining
A182 F347 Flanges Dimension Standards, Sizes And Pressure Rating
SA182 F347 Weld Neck Flange Uses & Application

A182 F347 Flanges Specification

Stainless Steel 347 Flanges Specification

Size In Ready Stock: ½” to 24″

Maximum Size: 26″ To 60″

Number of Bolts Hole: 4 To 48

Manufacturing Method: Stamping, Forged, Drilling, CNC Machining

Application: Oil & gas plants, Petrochemicals

347 Stainless Steel Lap Joint Flange Testing: Tensile Testing, PMI Testing, Hydrostatic Test

Surface Finish: Mirror Finish,Smooth Finish, Stock Finish

Corrosion Resistance: Hydrochloric Acid, Sulfuric Acid, Seawater

Supporting Material: Bolts and Nuts, Gaskets, Ring Joint

Value Added Services: Cutting, Threading, Polishing, Casting

ASTM A182 Gr F347 Slip On Flange Packaging : Wooden Case, Plastic Bag, Carton Box

DIN 1.4550 RTJ Flange Process: Rolling, Casting, Forging

Get Quote Directly from Stainless Steel 347 Flanges Suppliers in UAE

100% Tested SS 347 Flanges with MTC EN 10204 3.1/3.2

Ready to Dispatch Stock of SS 347 Flanges

SS 347 Lap Joint Flange

Surface Treatment: FF, RF, RTJ, Polished
Bolt Hole Quantity: 4, 6, 8, 10, 12, 14, 16

347 Stainless Steel RTJ Flange

Connection: Flanged, Threaded
Material: 347

A182 Gr F347 Reducing Flanges

Flange sealing face : FF RF RTJ
Transport:Wooden Case

347 SS Flanges

Sample: Free
HS Code:73072100

SA 182 Gr F347 Threaded Flange

Testing: UT, PT, NDT test
Manufacturing Way : Forging

ASTM A182 347 Industrial Flange

Working Temperature: 2100 – 2250°F
Density: 8.0 g/cm3

SUS 347 SORF Flange

Standard: ASTM A182 | ASME SA 182
Documentation: Third Party Inspection

AISI 347 Ring Type Joint Flange

Advantage: Higher Creep Stress
Custom Size: Yes

SS 347 Flanges Technical Specification

USA – ASTM/ ASME specification	SA 182 F347 meaning	ASTM A182 Grade F347 density
ASTM A182 F347 ASME SA 182 Gr 347	High pressure forged flanges for 347 stainless steel	8.0(g/cm³)
1.4550 stainless steel forged flange sizes	347 stainless steel flange pressure class	Temperature range
1/2″ to 48″ 15NB – 1200NB PN 2.5 – PN 400 For custom sizes you can contact above genuine stainless steel 347 flanges suppliers in UAE	150LBS 300LBS 600LBS 900LBS 1500LBS 2500LBS	1454 °C 2550 °F
347 stainless steel flange finish	Types	Manufacturing technique
Spiral Serrated Mirror finish / Cold Water Finish Concentric Serrated Serrated finish Stock Finish – 125- to 250-μin Smooth Finish	A182 Gr F347 lap joint flanges Werkstoff No 1.4550 weld neck flanges SA 182 GR F347 socket weld flanges A182 347 LWN flanges (Long weld neck) F347 blind flanges INOX 347 slip on flanges 347 SS reducing flange SUS 347 threaded flanges	ASTM A182 F347 forged flange (Most popular) / ASTM A182 F347 ASTM A240 Gr 347 plate flange / ASTM A240 347 ASTM A995 SS 347 cast flange / ASTM A351 CF8C
Types of DIN 1.4550 blind flanges	Types of SA 182 Gr F347 weld neck flanges	Types of SA 182 F 347 slip on flanges
EN 1.4550 forged blind flange ASTM A182 GR F347 ring type joint blind flange ASTM A182 Grade F347 threaded blind flange AISI 347 stainless steel raised face blind flange A182 F347 flat face blind flange	ASTM A182 F347 ring type joint weld neck flange UNS S34700 flat face weld neck flange A182 GR F347 long weld neck flange A 182 F347 raised face weld neck flange	ASME SA182 Grade F347 ring type joint slip on flange SA 182 GR F347 forged slip on flange SA 182 F347 flat face slip on flange 347 stainless steel raised face slip on flange A182 Gr. F347 threaded slip on flange
SS 347 flanges marking	German standard of 347 stainless steel flange	Applications and installations
Pressure class ASTM/ ASME standard Origin of material Material grade Manufacturers logo / name Sizes Manufacturing date Face type	DIN 2578, 2573 Type 1 – flat DIN 2527 Type 5 – blind DIN 2627 to 2638 Type 11 – Weld neck DIN 2558, 2565, 2566, 2567, 2568, 2569 Type 12 – threaded DIN 2622, 2641, 2655, 2656 Type 2, 4 Lapped	Power generation plant Petrochemical plants industrial pressure vessels Industrial piping connection (High/ Low pressure) Nuclear energy sector Construction & mechanical systems Buy from leading stainless steel 347 flanges suppliers who have zero rejection rates from South Africa, Egypt, USA, Oman, Middle east & Saudi Arabia
ASME SA182 F347 flanges meet the requirements of	Thread/screwed types of companion or ASTM A182 F347 threaded flanges	Value added service
NACE TM-0284 NACE MR0103 NACE MR0175 ISO 15156 Sour service	MNPT thread (Male) FPT thread FNPT thread (Female) – ASME B1.20.1 BSPT thread (Female) MPT thread NPT thread BSP thread BSPP thread (Female & male)	Above listed stainless steel 347 flanges suppliers & manufacturers offer these services: CNC machined Threading Casting Forging Fastest delivery in Saudi Arabia & Middle east Drilling Polishing Electroplating Cutting Fabricate (100% Radiography) Metal stampings Pickled Beveling end Minor Fabrication MTR’s Available Sand Blasting Tagging & marking De-burring Heat Treatment (Hardening & Tempering) Rolling
ASME & ANSI standard list of F347 stainless steel Flange	A182 F347 material inspection methods	Origin country and manufacturing standards
ASME/ ANSI B16.1 – Gray Iron (Gi) Flanges a nd Flanged Fittings: CL 25, Cl 125, and CL 250 ASME B16.5 – UNS S34700 Forged Flanges, NPS 1/2 to 24 inch ASME B16.20 – RTJ Gaskets for Pipe Flanges ASME B16.21 – Non metallic Flat Gaskets for Flanges ASME B16.24 – Cast Copper Flanges: Class 150 to 2500 ASME B16.36 – DIN 1.4550 orifice flanges ASME B16.34 – A182 F347 large diameter flanges (26 to 60 NPS) ASME B16.42 – Ductile iron flange, CL 150 and Cl 300 ASME B16.47 – SUS 347 large diameter flanges (26 to 60 Normal pipe size)	Hardness test Tensile test Verify stainless steel 347 flanges are manufactured as per the work order Visual inspection SS 347 flanges a dimensional check by ruler, calibrated caliper or tape (PMI) – Important test to check chemical composition Material inspection Impact test Dry film thickness check Shell pressure test	ASME SA 182 F347 UNS S34700 WNR 1.4550 Malaysia – MS 253 ASTM A182 F347 Malaysia – MS 816 USA – ASME B16.5 Europe – PN 10 to PN400 Germany – DIN Europe – BS EN 1092-1 Japan – JIS USA – MSS SP44 Australia and UK – BS 10 Russia – Ghost USA – ANSI B16.5 USA – API-605 Italy – UNI 2276/ 6091 Europe – BS EN 1092-1 (Steel) UK & Australia – BS 10 Europe – BS EN 1092-3 (Alloy) USA – AWWA Europe – EN Japan – JIS Europe – PN Germany – DIN USA – ANSI Europe – BS EN 1092-2 (Iron) Malaysia – MS 253 France – NF E 29-200/ NF E 29-203 Europe – ISO 7005 USA – AWWA USA – MSS SP44 Italy – UNI 2276/ 6091 Russia – Ghost Malaysia – MS 816 USA – ASA Korea – KS USA – CL 125 (Light weight) Australia – AS 2129 USA – API-605 Canada – CSA B16.5/ B16.47 China – GB/T 9112 / 9119
American standards	Other special SS 347 flanges	Bolt Hole
ASME B16.5: Class 150 – 2500LBS ASME B16.47: Series A/ B ASME B16.36 (SA 182 Gr F347 Orifice) ASME B16.48 (Stainless steel 347 Spectacle Blinds )	INOX 347 spade flange F347 swivel flange ASTM A182 Grade F347 ring spacer flange AISI 347 anchor flange AISI 347 stainless steel orifice plate 347 SS expander flange UNS S34700 stainless steel high hub blind flange EN 1.4550 reducing flange For custom or fabrication work contact above listed top 10 stainless steel 347 flanges maufacturers	4 to 24

find Authorised Dealer and Distributors of Stainless Steel 347 Flanges in Abu Dhabhi

HEBEIPAL Pipes And Fittings Trading,Abu Dhabi
Swissnox Stainless Steel LLC,Abu Dhabi
New Life Steel Trading LLC,Abu Dhabi
Noble Marine Metals Co. WLL,Musaffah, Abu Dhabi

DIN 1.4550 socket weld flange and SUS 347 Sorf flange with the hydro test. view Sa 182 347 threaded flange price per kg in Dubai

Stainless steel 347 flanges faces types

Find Various Face Types From Stainless steel 347 flanges Suppliers in UAE

Full name	Short name	Material
Werkstoff No 1.4550 flat face flanges	FF	ASTM A182 F347 FF Blind
ASTM A182 GR F347 raised face flanges	RF	SA 182 F347 SORF
ASME SA182 Grade F347 ring joint flanges	RTJ	ASTM A182 grade 347 RTJ
A182 Gr. F347 lap joint flanges	LJ	Stainless steel 347 LJF
SA 182 F347 male and female flanges	M&F	SA 182 grade 347 M&F
A182 GR F347 large and small tongue and groove flanges	T&G	Stainless steel 347 T&G

ASTM A182 F347 Socket Weld Flanges Chemical Composition

Stainless steel 347 flanges Suppliers in UAE offering high-performance goods with exceptional Chemical analysis.

Grade	Nickel	Manganese	Sulfur	Columbium & Tantalum	Chromium	Carbon	Phosphorus	Silicon	Iron
Stainless steel 347 flanges	9.00-13.00	2.00	0.03	10xC minimum 1.00 maximum	17.00-19.00	0.08	0.045	0.75	Balance

Mechanical Properties of ASTM A182 GR F347 forging Flanges

Grade	Proof (MPa) minimum Yield Strength 0.2%	Elongation (% in 50mm) minimum	Tensile Strength (MPa) minimum	Hardness
Grade	Proof (MPa) minimum Yield Strength 0.2%	Elongation (% in 50mm) minimum	Tensile Strength (MPa) minimum	Rockwell B (HR B) maximum	Brinell (HB) maximum
SS 347 flanges	205	40	515	95	201

ASTM A182 F347 threaded flanges Equivalent

Standard	WERKSTOFF NR.	UNS	EN	GOST	JIS
347 SS flanges	1.4550	S34700	X6CrNiNb18-10	08Ch18N12B	SUS 347

Stainless Steel 347 Flanges Properties

Material Inspection Facilities in the Following Countries

Region	City	Country
Middle East	Abu Dhabi	United Arab Emirates
Middle East	Kuwait City	Kuwait
MENA	Casablanca	Morocco
MENA	Cairo	Egypt
Africa	Cape Town	South Africa
Middle East	Dammam	Saudi Arabia
Africa	Abuja	Nigeria
Middle East	Dubai	United Arab Emirates
Middle East	Riyadh	Saudi Arabia
Middle East	Doha	Qatar
Middle East	Jeddah	Saudi Arabia
Africa	Johannesburg	South Africa
Africa	Lagos	Nigeria

SS 347 flanges Temperature Range

1454 °C
2550 °F

SA 182 F347 Forged Flanges Hardness

Grade	(MPa) minimum Tensile Strength	Hardness
Grade	(MPa) minimum Tensile Strength	(HB) maximum Brinell
ASTM A182 F347 flange	515	201

Manufacturing Standard of 347 SS flanges

Manufacturing Method	ASTM specification
A182 Gr F347 forged flanges	ASTM A182 F347
SA 182 F 347 machined flanges (Made from Bar stock)	ASTM A276 347
A182 347 plate flange	ASTM A240 347
1.4550 stainless steel cast flange	ASTM A351 CF8C

Stainless steel 347 pipe flanges Diameter and Number of the Bolt Holes

Pressure class	Hole
EN 1.4550 Class 150 flanges	25.4 mm/ 12 holes
A 182 F347 Class 300 flanges	28.6 mm / 16 holes
SA 182 Gr F347 Class 400 flanges	34.9 mm / 16 holes
347 SS Class 600 flanges	34.9 mm/ 20 holes
A182 347 Class 900 flanges	38.1 mm/ 20 holes
SUS 347 Class 1500 flanges	54 mm/ 16 holes
F347 Class 2500 flanges	73mm / 12 holes

ASTM A182 F347 flange common designation

Common Designation	Forging Specification	Service Recommendations	UNS Designation	Material Suffix	Wrought Bar Specification
18 chromium, 8 nickel modified with columbium 347^E	ASTM A182 F347	0.04%minimum carbon (grade F347H) and heat treat at 200°F (1100°C) for service temps. >1000°F (538°C)	S34700	ASTM A351 Grade CF8C	ASTM A240 347

Types of 347 stainless steel flanges

Stainless steel 347 blind flanges

SS 347 weld neck flange

Type 347 ss slip on flanges

ASTM a182 f347 socket weld flange

SA182 f347 threaded flange

Din 1.4550 lap joint flanges

DIN 1.4550 lap joint flanges

AISI 347 spectacle blind flange

SUS 347 forged flanges

UNS s34700 plate flanges

Inox 347 raised face flange

ASTM a182 grade f347 ring type joint flange

347 SS orifice flange

Sales Representatives Across Various Continents

MENA	Algeria, Israel, Egypt, Palestine, Libya, Morocco, Tunisia
Middle East countries	Bahrain, UAE, Kuwait, Iraq, Jordan, Iran, Syria, Yemen, Lebanon, Qatar, Saudi,
Africa	Tunisia, Egypt, Algeria, South Africa, Nigeria, Morocco, Kenya

Check a182 gr f347 reducing flange and UNS S34700 forged flanges price list. see din 1.4550 screwed flange pressure rating and sizes

ASME SA182 F347 flanges pressure class rating

Type of flange	ASME/ ANSI B16.5	ASME/ ANSI B16.47 (Series A/ MSS SP44)	ASME/ ANSI B16.47 (Series B/ API605)
–	Size: 0.5″ to 24″	Size: 26″ to 60″	Size: 26″ to 60″
SS 347 weld neck	Class 150-2500	Class 150-2500	Class 150-2500
Stainless steel 347 long weld neck	Class 150-2500	Class 150-2500	Class 150-2500
SA 182 F347 slip on	Class 150-1500	–	–
ASTM A182 F347 lap joint	Class 150-2500	–	–
AISI 347 stainless steel blind	Class 150-2500	Class 150-2500	Class 150-2500
ASTM A182 Grade F347 socket weld	Class 150-1500	–	–
A182 Gr. F347 threaded	Class 150-2500	–	–

SA182 Grade F347 Slip On Flange Size chart

Pipe Size	Diam of Raised Face	Outside Diam of Flange	Thickness of Flange	Length Thru Hub			Diam of Hub at Base	Diam or Bore		Radius of Fillet	Depth of Socket	Diam of Hub at Bevel
	Diam of Raised Face	Outside Diam of Flange	Thickness of Flange	Welding Neck	Lap Joint	Slip-On Threaded Socket	Diam of Hub at Base	Lap Joint	Slip-on Socket	Radius of Fillet	Depth of Socket	Diam of Hub at Bevel
	R	O	Q	Y	Y	Y	X	B	W	r	Z	H
3 / 4	1-11 / 16	3-7 / 8	1 / 2	2-1 / 16	5 / 8	5 / 8	1-1 / 2	1.11	1.09	1 / 8	7 / 16	1.05
3	5	7-1 / 2	15 / 16	2-3 / 4	1-3 / 16	1-3 / 16	4-1 / 4	3.60	3.57	3 / 8	13 / 16	3.50
4	6-3 / 16	9	15 / 16	3	1-5 / 16	1-5 / 16	5-5 / 16	4.60	4.57	7 / 16	15 / 16	4.50
6	8-1 / 2	11	1	3-1 / 2	1-9 / 16	1-9 / 16	7-9 / 16	6.75	6.72	1 / 2	1-1 / 16	6.63
1-1 / 4	2-1 / 2	4-5 / 8	5 / 8	2-1 / 4	13 / 16	13 / 16	2-5 / 16	1.72	1.70	3 / 16	9 / 16	1.66
2	3-5 / 8	6	3 / 4	2-1 / 2	1	1	3-1 / 16	2.46	2.44	5 / 16	11 / 16	2.38
10	12-3 / 4	16	1-3 / 16	4	1-15 / 16	1-15 / 16	12	10.92	10.88	1 / 2	1-5 / 16	10.75
18	21	25	1-9 / 16	5-1 / 2	3-13 / 16	2-11 / 16	19-7 / 8	18.20	18.18	1 / 2	1-15 / 16	18.00
14	16-1 / 4	21	1-3 / 8	5	3-1 / 8	2-1 / 4	15-3 / 4	14.18	14.14	1 / 2	1-5 / 8	14.00
24	27-1 / 4	32	1-7 / 8	6	4-3 / 8	3-1 / 4	26-1 / 8	24.25	24.25	1 / 2	2-1 / 2	24.00

Buy directly from the top manufacturers of Inox 347 spectacle blind flange at affordable prices in the Sharjah.

Diverse Client Base in the Following Nations

Al Jubail	Abu Dhabi	Saudi Arabia	Ajman
Fujairah	Umm Al Quwain	Sharjah	Doha
Riyadh	Dubai	Muscat	Ras Al Khaimah

Find trusted suppliers of SS 347 flanges in the middle east and Asia. check a182 f347 lap joint flange and UNS S34700 ring type joint flange dimension chart

SS 347 Blind Flange Dimension Chart

Standard	AS 2129 Flange						ISO 7005 (DIN) Flange						ANSI B16.5 Flanges					AS4087
Class	Table D	Table F	Table J	Table C	Table E	Table H	PN10	PN20	PN40	PN6	PN16	PN25	ANSI 300	ANSI 900	ANSI 150	ANSI 600	ANSI 1500	PN14
Bolt Circle Diam	67	67	83	67	67	83	65	60.5	65	55	65	65	67	83	60	67	83	67
Diam	95	95	114	95	95	114	95	90	95	80	95	95	95	121	89	95	121	95
Bolt Size	13	13	16	13	13	16	M12	M14	M12	M10	M12	M12	13	19	13	13	19	M12
No.of Bolts	4	4	4	4	4	4	4	4	4	4	4	4	4	4	4	4	4	4
Diam.of Bolt Hole	14	14	17	14	14	17	14	16	14	11	14	14	16	22	16	16	22	14

347 Stainless Steel Blind Flanges Corrosion Resistance Temperature

427 To 816°C
800 To 1500°F

ASME SA182 F347 Flanges Gasket Chart

Normal Pipe Size		1 1/4	1	2	1 1/2	3	2 1/2	5	4	8	6	12	10
Gasket I.D.		1.66	1.31	2.38	1.91	3.5	2.88	5.56	4.5	8.62	6.62	12.75	10.75
Gasket O.D.	150 LB	3	2.625	4.125	3.375	5.375	4.875	7.75	6.875	11	8.75	16.125	13.375
	400 LB	3.25	2.875	4.375	3.75	5.875	5.125	8.375	7	12	9.75	16.5	14.125
	300 LB	3.25	2.875	4.375	3.75	5.875	5.125	8.5	7.125	12.125	9.875	16.625	14.25
	600 LB	3.25	2.875	4.375	3.75	5.875	5.125	9.5	7.625	12.625	10.5	18	15.75
	900 LB	3.5	3.125	5.625	3.875	6.625	6.5	9.75	8.125	14.125	11.375	19.625	17.125

A182 F347 Flanges Machining

Operation	Tool	Lubrication	Depth-mm	Depth-in	Feed-mm/t	Feed-in/t	Speed-m/min	Speed-ft/min
Turning	High Speed Steel	Cutting Oil	6	.23	0.5	.019	12-16	39-52
			3	.11	0.4	.016	18-23	59-75
			1	.04	0.2	.008	23-28	75-92
	Carbide	Dry or Cutting Oil	6	.23	0.5	.019	67-76	220-249
			3	.11	0.4	.016	81-90	266-295
			1	.04	0.2	.008	99-108	325-354
			Depth of cut-m	Depth of cut-in	Feed-mm/t	Feed-in/t	Speed-m/min	Speed-ft/min
			1.5	.06	0.03-0.05	.0012-.0020	16-21	52-69
Cutting	High Speed Steel	Cutting Oil	3	.11	0.04-0.06	.0016-.0024	17-22	56-72
			6	.23	0.05-0.07	.0020-.0027	18-23	59-75
			Drill Ø mm	Drill Ø in	Feed-mm/t	Feed-in/t	Speed-m/min	Speed-ft/min
			1.5	.06	0.02-0.03	.0007-.0012	9-13	29-42
			3	.11	0.05-0.06	.0020-.0024	11-15	36-49
Drilling	High Speed Steel	Cutting Oil	6	.23	0.08-0.09	.0031-.0035	11-15	36-49
			12	.48	0.09-0.10	.0035-.0039	11-15	36-49
					Feed-mm/t	Feed-in/t	Speed-m/min	Speed-ft/min
Milling Profiling	High Speed Steel	Cutting Oil			0.05-0.10	.002-.004	11-21	36-69

A182 F347 Flanges Dimension Standards, Sizes And Pressure Rating

Dimension Standards	Ratings	Size Range
ASME/ANSI/B16.36	300# TO 2500#	1" TO 24"
BS 3293	150# TO 600#	26" TO 48"
ASME/ANSI B16.5	150# to 2500#	1/2" to 24"
MSS SP 44	150# to 900#	12" TO 60"
ASME/B16.47/API 605		26" TO 60"
ASME B16.48 / API 590	150# TO 2500#	1/2" TO 24"
API 6A API 6B	2000 PSI TO 20000 PSI	2 1/6" TO 30"
DIN	PN6 TO PN160	DN10 TO DN3600

SA182 F347 Weld Neck Flange Uses & Application

Offshore and Onshore Services
Power Generation Industries
Construction
Bridges
Petrochemical Industry
Ship Building
Engineering
Food Processing Industries
Oil and Gas Industries
Sugar Industries

Storage Sites of Partner Supplier

Country	Cities
Netherlands	Eindhoven
Belgium	Ghent
Netherlands	Rotterdam
Netherlands	The Hague
Belgium	Brussels
Netherlands	Haarlem
Belgium	Meeuwen-Gruitrode
Belgium	Seraing
Netherlands	Amsterdam
Belgium	Leuven
Belgium	Westerlo
Belgium	Antwerp