Stainless steel 410S round bar

Stainless Steel 410S Round Bar

SS 410S rod and AISI 410S flat bar suppliers in UAE

Industries operating in high-stress conditions turn to stainless steel products for reliability and strength. Purchasing a stainless steel 410s round bar for your business can reap rich rewards: longevity and corrosion resistance. This austenitic material can tolerate extreme environments. However, finding authentic manufacturers, stockists, and suppliers of these products can be challenging.

The approach followed by pipingmaterial.ae to list suitable providers emphasises authenticity and trust. Our team personally verifies the vendor – certificates, accreditation documents, etc. – and lists only the best ten names. Integrating this strategy into your procurement process can save time and costs. It connects you only to legit companies for 410s stainless steel rods that match your budget.

Verified Supplier

available 10 cars

A best marketplace to meet verified SS 410S hex bars and stainless steel 410S bar suppliers for less rush shipping costs in the Middle East

Stainless steel 410S round bar specifications


Stainless steel 410s round bar specification

For special sizes, get in touch with one of the licenced stainless steel 410S round bar suppliers in the UAE listed above.
410S stainless steel round bar size Stainless steel 410S flat bar size 1.4000 AISI 410S cold rolled hex bar size
Diameter 4mm to 500mm
  • Thickness: 3mm – 12mm
  • Width: 12mm – 150mm
18mm – 57mm
AISI 410S bar ASTM Standard SS 410S square bar size AISI 410S stainless steel angle bar size
  • ASTM A276
  • ASTM A479
  • ASTM A182
  • ASTM A314
  • ASTM A370
  • ASTM A484/A484M
  • ASTM A582/A582M
  • ASTM A751
Sizes: 18mm – 47mm 3*20*20~12*100*100
SUS410S stainless steel rectangular bar supply state Oxidation Resistance SUS 410S bright bar finish
  • Annealed
  • Hardened strain
  • Solenoid quality
  • Smooth Turned & Polished
  • Turned & rough polished
  • The strain Hardened
  • Peeled and polished
  • Trailed center less ground & polished
1300°F
  • Bright
  • Polishing
  • Pickled
  • Peeled
  • Mirror
  • Hairline
  • Black
  • Belt polished condition
Melting point Density Temperature range
1532°C 7.8 g/cm3 2000°F (1093°C)
INOX 410S rod shape WNR 1.4000 bar stock value added services 410S SS polished bar tolerances
  • Hexagonal
  • Rectangular
  • Hollow
  • Round
  • Square
  • Trepanning
  • Folding
  • Heat Treatment
  • Production Bar Cutting
  • Chemical Milling
  • Turn, Ground, and Polishing
  • Rigidizing
  • Custom Packing
  • Surface Machining
  • Shearing
  • Precision Grinding

Use chat or email to communicate directly with the stainless steel 410S round bar stockists, stockholder, and distributors of these services.

  • H8
  • H9
  • H10
  • H11
  • H12
  • H13
  • K9
  • K10
  • K11
  • K12 or custom
ASTM A276 type 410S cold drawn bar weight formula ASTM A276 grade 410S bar heat treatment Hardness range
  • SUS410S stainless steel round bar: Diameter (mm) X Diameter (mm) X 0.00623 = Wt. per Mtr.
  • Werkstoff Nr. 1.4000 hex bar: Size (mm) X Size (mm) X 0.00680 = Wt. per Mtr.
  • 410S SS flat bar: Width (mm) X Thickness (mm) X 0.00798 = Weight per Mtr.
  • ASTM A276 410S square bar: Size (mm) X Size (mm) X 0.00788 = Wt. per Mtr.
  • Annealed
  • Solution Annealed
Rockwell B (HR B)- 75
Most common types of ASTM A276 Gr 410S round bar ASTM A276 TP 410S hot rolled bars condition Manufacturing methods of A276 GR 410S bar
  • 410S Stainless Steel rod
  • Stainless steel 410S flat bar
  • AISI 410S square bar
  • SS 410S hex bar
  • ASTM A276 410S threaded bar

Compare our prices and response times with those of other stockists of stainless steel 410S round bar

  • Condition B (severe cold worked)
  • Condition T (hardened and tempered at high temp)
  • Condition A (Annealed)
  • Condition H (hardened and tempered)
  • Condition S (strain hardened/ light cold worked)
  • Hot Finished
  • Cold Finished
Certification of A276 TP410S annealed bar Origin standards of A276 type 410S forged bar A276 410S hexagonal bar features
  • EN 10204/3.1B, EN 10204 3.1
  • Third Party Inspection Report
  • Moisture testing report
  • EN 10204 3.2 Material Test Certificates (MTC)
  • NACE certified
  • DFARS compliant
  • Form A for Generalized System of Preferences (GSP)
  • IGC practice E
  • Fumigation Certificates
  • HS Code Commercial Invoice
  • Laboratory Test Certificate from Govt. Approved Lab
  • Raw Materials Certificate
  • Heat Treatment Charts
  • Surface roughness measurement
  • American Standard
  • Russia Standard
  • Janpanese Standard
  • European Standard
  • Weldability
  • Corrosion resistance
  • Durability
A276 Gr 410S forged cold drawn bar benefits A276 TP 410S round bar marking SS 410S peeled round bars applications
  • Weldable by most common techniques.
  • Good resistance to oxidation.
  • Continuous services up to 1300°F (705°C)
  • Specification
  • Material Grade
  • Nominal Size
  • Schedule or Wall Thickness
  • Method of Manufacturing
  • Heat Number
  • Manufacturer’s Name or Custom Logo – on request
  • Petroleum Refining
  • Quenching racks
  • Gate valves
  • Press plates
  • Heat exchangers
  • Towers
  • Ore Processing
  • Mining machinery
  • Petrochemical Processing
  • Columns
  • Distillation trays
  • Annealing boxes

The above-mentioned stainless steel 410S round bar suppliers were ex-stock and have previously supplied to the Nigeria, South Africa, Tanzania, Swaziland, Saudi Arabia, Kuwait, Qatar and Bahrain among other nations.

AISI 410S forged round bar documentation offered AISI 410S stainless steel bright bar packaging Why choose stainless steel 410S round bar suppliers from pipingmaterial.ae ?
  • Copy of Invoice
  • Copy of Packing List indicating details of Sizes, quantity, weight, thickness etc.
  • Manufacturer’s Mill Test Certificate certifying, Heat No, finish, Chemical Composition, Grade etc.
  • Country of Origin Certificate (Original)
  • Bill of Lading.
  • Wooden Boxes
  • PE Fabric Bundles
  • Crates (steel/wooden)
  • Wrapped in plastic or standard seaworthy export packing
  • Custom
  • Special crates for with each radius separated
  • Bundles (hexagonal)
  • Ship with MTC Acc. to EN 10204/3.1
  • Solution treatment / aging treatment
  • High precision process available
  • Quick responce within 24 hours
  • Quotation with valuable data sheet
SS 1.4000 hex bar payment term Elongation Lifespan
  • LC
  • TT
  • West union
  • Paypal
33 % Over 50 years
INOX 410S round bar testing requirements WNR 1.4000 bloom delivery time Stainless steel 410S bar transport
  • Chemical test
  • Pmi test
  • Visual inspection test
  • Mechanical test
  • Third party inspection test
  • Flaring Test
  • Destructive test
  • Non destructive test
  • Nabl approved lab test

Successful and brief communication with the dealers, distributors, and stainless steel 410S round bar
stockists listed above

  • Generally it is 7-10 days if its in stock
  • 15-20 days if its not in stock
  • By sea
  • By air

Thermal conductivity of SUS 410S square bar

Product Description Thermal conductivity
Stainless steel 410S round bar (Btu/ft hr ⁰ F) – 187 at 212oF

WNR 1.4000 rectangular bar chemical composition

Grade Si S Cr Mn P C N Fe
Stainless steel 410S round bar min. 11.5
max. 1.00 0.03 13.5 0.008 0.04 0.08 0.6 Balance

Stainless steel 410s round bar properties

Mechanical properties of ASTM A276 UNS S41008 bright bar

Yield Strength (0.2%Offset) Elongation Tensile Strength Density Hardness
Psi – 42,000 MPa – 290 33 % Psi – 64,400 MPa – 444 7.8 g/cm3 Rockwell B (HR B)- 75

What are the different types of stainless steel 410S round bar?

SS 1.4000 bloom

SS 1.4000 bloom

ASTM A276 UNS S41008 shaft

ASTM A276 UNS S41008 shaft

Stainless steel 410S flat bar

Stainless steel 410S flat bar

AISI 410S square bar

AISI 410S square bar

410S stainless steel rod

410S stainless steel rod

Werkstoff Nr.1.4000 bar stock

Werkstoff Nr.1.4000 bar stock

ASTM A276 grade 410S cold finished round bar

ASTM A276 grade 410S cold finished round bar

410S SS bright drawn round bar

410S SS bright drawn round bar

ASTM A276 Gr 410S peeled round bars

ASTM A276 Gr 410S peeled round bars

ASTM A276 410S threaded bar

ASTM A276 410S threaded bar

A276 Type 410S hot rolled bars

A276 Type 410S hot rolled bars

ASTM A276 type 410S hot finished round bar

ASTM A276 type 410S hot finished round bar

1.4000 AISI 410S cold rolled rectangular bar

1.4000 AISI 410S cold rolled rectangular bar

SS 410S hex bar

SS 410S hex bar

AISI 410S stainless steel bright bar

AISI 410S stainless steel bright bar

SUS410S stainless steel rounds

SUS410S stainless steel rounds

SUS 410S billet

SUS 410S billet

INOX 410S polished bar

INOX 410S polished bar

A276 410S annealed bar

A276 410S annealed bar

WNR 1.4000 cold drawn bar

WNR 1.4000 cold drawn bar

A276 Gr 410S forged bar

A276 Gr 410S forged bar

1.4000 stainless steel ground and rolled polished bar

1.4000 stainless steel ground and rolled polished bar

A276 TP 410S forged cold drawn bar

A276 TP 410S forged cold drawn bar

ASTM A749 forged round bar

ASTM A749 forged round bar

INOX 410S rounds cold finish tolerances

Cold Finish 3.25 to 4, incl +/- 0.005″
0.500 to 1, excl +/- 0.002″
1 to 1.5, excl +/- 0.0025″
1.5 to 3.25, incl +/- 0.003″
0.0625 to 0.3125, excl +/- 0.001″
0.3125 to 0.500, excl +/- 0.0015″

ASTM A276 Type 410S shaft physical properties

Density (lb./ in^2) @ RT 0.28
Modulus of Elasticity in Tension (psi x 10^6) 29.0
Specific Heat (BTU/o F/lb.) 32 to 212 oF 0.11
Electrical Resistivity (micro ohms – cm) at 70oF 23.7
Melting Point Range (oF) 2700-2790
Oxidation Resistance – Continuous Service(oF) 1300

Material equivalent of SS 1.4000 bar

Standards Country Value
UNS North America S41008
WNR Russia 1.4000
ASTM America A276
ASME Australia SA276
JIS Japan SUS410
BS United Kingdom
GOST Russia
AFNOR France
EN Europe
AMS United States
ANSI America
SAE United States
AS Australia
DIN German 1.4000

The location and schedule of the WNR 1.4000 bar delivery

Transport to variations in price and scheduled delivery
UAE 5 % extra | 5 Days
South Africa 5 % extra | 25 to 30 days
Saudi Arabia 5 % extra | 7 days
Qatar 5 % extra | 7 days
USA 5 % extra | 40 to 60 days
Uk 5 % extra | 30 days
France 5 % extra | 30 days
Italy 5 % extra | 30 days
Malaysia 5 % extra | 10 days
Philippines 5 % extra | 14 days
Indonesia 5 % extra | 9 days
Oman 5 % extra | 5 days

 

410S SS square bars and stainless steel 410S bright bars according to EN 10204/3.1B

Quality assurance is of utmost importance when procuring industrial materials. EN 10204 is a British Standard for inspection certificates for metallic products. Under this, Type 3.1 gets commonly used for a SUS 410s square bar.

EN 10204 3.1 B refers to an inspection certificate issued by the manufacturer. This certificate states that the items meet the requirements of the client’s order. It also showcases the results of mechanical tests, chemical composition analysis, etc., which also getsreferred to as “specific testing”.

Note: The certifying person for the UNS S41008 polished barmust be outside the manufacturing process, for example, an authorised supervisor. It helps keep the process transparent and assures customers of high-quality products or materials.

Industries like petrochemicals, power, and general engineering often use ASTM A276 type 410s rectangular bars. We recommend seeking a manufacturer with stringent tolerance limits to meet your needs. The straightness tolerance measures how straight the rod must be to conform to the accepted standard. The typical tolerance for cold-finished bars is 0” to 1/8”. It is 0” to 3/8” for hot-finished ones.

Grade 410S is the modified version of Grade 410 of stainless steel. An SS 410s flat barhas lower carbon content (maximum 0.080 as opposed to 0.15), making it more weldable and machinable. Its chemical composition includes chromium, nickel, manganese, titanium, and other trace elements.

SS 410S Threaded bar and WERKSTOFF NR. 1.4000 rectangular bars stock at great prices in Dubai

Bright bars get produced via cold drawing and are geometrically precise in their internal structure. These bars are available in various sizes and shapes, like round, hexagonal, square, etc. The dimensions vary based on your desired shape and customisation. For example, an ASTM A479 grade 410s bright bar is available in 4mm to 100mm diameters.

The length of these bars ranges from 1 to 6 meters. Many suppliers can offer products in custom dimensions upon request. Their applications in industry are diverse: from shipbuilding and petrochemicals to construction and offshore/onshore purposes.

Intermediate sized stainless steel 410S Rounds and 410S SS hot rolled round bar with diameters such as 25mm to 50mm, 2.1/4”, 2.1/2” & 3” will usually be smooth turned

This grade is renowned for its strength and impact resistance. A DIN 1.4000 forged barcan resist buckling and cracking even under high loads. The tensile strength of this material is 400 to 630MPa.

Cold-rolled steel tends to be stronger than its hot-rolled counterpart. It gets favoured in applications that operate under severe pressure and temperature.

Customers can order an AISI 410s hex bar in the annealed state. Treatments like tempering and quenching are also fairly common. Buyers can choose the heat treatment or hardening that produces the ideal profile for their industry.

Peeled vs smooth turned stainless steel 410s bars

Both types of stainless steel bars – peeled and smooth turned – are popular in the industrial landscape. Manufacturing via forging or hot-rolling can create imperfections on the surface of SA 276 Gr 410s rounds.

The peeling removes surface defects like chunks,cracks, skins, fine particles, etc. Safety precautions and protective clothing are essential during this process. It is a precise and quick approach that offers strict tolerances. However, it leaves behind turning marks.

Smooth turned bars do not have marks, making them preferable for clients who prefer a uniform finish. Manufacturers employ grinders to remove these marks. But their precision does not match that of the peeling technique.