Stainless steel anchor bolt

Stainless steel anchor bolt

Difference between SS concrete wedge anchors and sleeve anchor

Belonging to the same category of fasteners, here are the differences between the two components –
While a Stainless steel wedge anchor is limited in its use to concrete, sleeve type can be used in either concrete, brick or block. The holding value of a wedge type is significantly higher than a sleeve one in terms of shear and pullout values.

Verified suppliers

Verified Stockists (Contact directly for best price)

available 10 cars

Stainless steel wedge anchors and SS 304 anchor bolt suppliers in UAE

Stainless Steel Anchor Bolt Specifications

Stainless Steel Anchor Bolt Chemical Composition

Stainless Steel Anchor Bolt Mechanical Properties

What are stainless steel anchor bolt?

These fasteners are used in structural construction, holding them down to the concrete. Produced from different steel grades, they have high strength.

Stainless steel concrete anchors in M5 to M30 metric sizes, check 316L SS anchor bolt price and specifications

How do you keep Stainless Steel anchor bolts from rusting?

There are two processes to prevent corrosion in Stainless Steel Anchor Bolts.
Using the appropriate alloy. Preferably grade 316 or higher, as they excel in resisting corrosion from different media.
Using a protective finish. When finishes are coated on the surface of the fastener, they act as a sacrificial layer in the presence of corrosive reagents. Hence, the inner metal is adequately protected. Painting, varnishing, galvanizing or cadmium coating are popular finishes.

Wide range of colored, coated & polished stainless steel sleeve anchors in the Dubai, Check 304L SS concrete screws application and advantages

What type of epoxy is used for SS anchor bolts?

If the installation is to take place down, pure epoxy is best suited to ss anchor bolts in dry concrete and it will yield high strength. On the other hand, Polyester resins are suited to use in a relatively cold concrete substrate

Contact 316 Stainless Steel Anchor Bolts and SS sleeve anchor bolt suppliers in the Middle East as per ASTM A380, A380M american specifications

What are the advantages and disadvantages of stainless steel anchor bolts?

Advantages –

  • They have good resistance to corrosion in various mediums and have high mechanical strength in elevated temperatures.

Disadvantages –

  • Failure of stainless steel alloys – If the steel used as an anchor bolt fails due to shear load, the fastener would cause the application to fail as well.
  • The bolts would also fail in the event of spalling, concrete pull out or pry-out failure.
Stainless steel anchor fasteners manufacturer & supplier in UAE, buys SS bent anchor bolts in various coatings, threads and finish

How deep should ss wedge anchor bolts be in concrete slab?

For an embedment to be effective the minimum length for Stainless steel wedge anchor bolts needs to be either four bolt diameters (4db) or 2 inches (51 mm) or whichever is greater.

SS 304 anchor bolt vs anchor fastener

An anchor bolt is a fastener that can be used with concrete or other hard material. Typically these components have a sleeve that slides down when the bolt rises up. The sleeve is then locked into place the bolt is tightened. An anchor fastener is fastened to a wall. The material to make these fasteners can differ. They encompass different types such as – plastic, metal, toggle etc.

How much weight can SS drywall anchors hold?

Generally, Stainless steel drywall anchors have a set weight that must not be exceeded. Some anchors have a capacity of 30 pounds, while others may have a higher capacity ranging between 50 to 100 pounds.