Stainless steel sanitary fittings

• DN 10 to DN 150
• 1/2″ – 12″

• Werkstoff 1.4301 (AISI 304)
• Werkstoff 1.4401 (AISI 316)
• Werkstoff 1.4404 (AISI 316L)
• Werkstoff 1.4307 (AISI 304L)
• Werkstoff 1.4435 (AISI 316LMo)

Buy 3-A certified stainless steel sanitary pipe fittings at lowest price in UAE, get a quick quote from genuine suppliers and manufacturers

• SMS
• DIN
• ASME-BPE
• ISO

• 12.7 mm
• 21.5 mm
• 28.6 mm

• DIN 11851
• DIN 11865
• ASME BPE Standard DT-18
• DIN 11864 (Union)

• DIN EN 10204 3.1 test certificate
• Surface roughness test certificate
• 3.1/AD2000-W2 test certificate

• Ra ≤ 0,8 µm (Contact with product)
• ID Finish <0.5µm
• Ra ≤ 1,6 µm (Not in contact with product)
• OD Finish <0.8­µm Polished

• BS 4825 SS Unions: roughness average (Ra) of < 0.8 – 1.6 μ
• ISO 2037 stainless steel clamp fitting: (Ra) of < 0.8 – 1.6 μ
• DIN 11850 SS sanitary fittings: (Ra) of < 0.8 – 1.6 μ
• ASME stainless steel hygienic fittings: (Ra) of < 0.4 – 0.8 μ

• Bends:
  90° ISO Bend R=1.5D
  45° Bend R=1.5D
  90° BS Short Bend R=1.5D
  Tri-Clamp Ferrule Ended 90° Bend
• Tees:
  Equal Full Tee
  Tri-Clamp Ferrule End Equal Tee
  Pulled Reducing Tee
  Full Equal Cross
  Pulled Cross
• Special Tees: Swept Tee, Seagull Tee, Y-Piece, 45° Y-Piece
  Reducing Cones: Concentric Reducing Cone, Eccentric Reducing Cone
• Hosetail: Tri-Clamp Ferrule Ended Hosetail, RJT Hose Liner, RJT Male Ended Hosetail
• Domed End Cap: 1″ OD DOMED END CAP DESCALED 316, 1.5″ OD DOMED END CAP DESCALED 316, Metric Domed End Cap
• Sprayball: 3/4″INLET x 40mm DIA SPRAYBALL 360° SPRAY PATTERN – 1.6mm
• BPE/Pharmaceutical Fittings: 1/2″ DT7 90 ELBOW SFF1 316 WELD ENDS, 3/4″ DT7 90 ELBOW SFF1 316 WELD ENDS
• Ancillary Products: Stainless Steel Chain

• Unions
• Reducers
• Clamp fittings
• Tees
• Bends

• Manufactured from cold-formed stainless steel single piece
• Crevice-free welds
• Tight tolerances
• Easy-to-clean
• Smooth weld ends

• FKM
• HNBR
• EPDM

• SF0 : µ-in / µm
• SF6 : 25 µ-in 0.64 µm
• SF5 20 µ-in 0.51 µm
• SF1 : 20 µ-in 0.51 µm
• SF4 : 15 µ-in 0.38 µm
• SF3 : 30 µ-in 0.76 µm
• SF2 : 25 µ-in 0.64 µm

• ASME/ BPE fittings
• SS hygienic fittings
• SS dairy fittings
• Stainless steel sanitary fittings
• Pharmaceutical fittings

• ISO 2037
• 3.1 MTC
• EN 10357-A
• EN 10272
• BS 4825
• ASME dimensions
• ASTM A270 S2 / 3A

Buy high quality SS hygienic fittings as per above specification from genuine stainless steel sanitary fitting suppliers in UAE

• Mill
• Mechanical Polish
• Electro Polish
• Sanitary/Dairy Finish (150 grit, #4)
• 3A Sanitary Finish (180 grit, #4)
• Biotech Finish (200 to 220 grit, #4)
• Fine Satin Finish (240 grit, #6)
• Semi-Bright Finish (320 grit, #7)
• Mirror Finish (400 grit, #8)
• Super-Mirror Finish (500 grit, #8)

• Buff #100 (3A Sanitary Finish)

• No. 1 – Mill Finish (bright annealed, sand blasted, pickled, or tumbled)
• No. 3 – Polished SS dairy fittings 32 Ra ID only
• No. 5 – Polished SS sanitary fittings 32 Ra ID only
• No. 7 – Polished SS sanitary fittings 32 Ra ID only
• 3 A – Polished SS hygienic fittings 150 grit OD, 32 Ra ID