What is threaded bend?
Threaded connections are commonly used in small bore piping with nominal diameters of NPS 2 or less. It is the oldest and most widely used pipe joining method. Threaded pipe fittings are used in non-critical applications that require lower temperatures and pressures. The plumbing industry uses the vast majority of threaded fittings.
The American Standard ASME B1.20.1 specifies the number of threads per inch, pitch diameter, and normal engagement lengths for taper pipe threads in Threaded 90-degree bend Forging is used to create threaded steel fittings. They are available in various thread types, including NPT, BSPP, BSPT, PF, PT, and MPT.
Buy stainless steel threaded 90 degree bend directly from suppliers in the Middle East and India
Difference between flanged vs threaded bend
Threaded connections are nearly the inverse of flange connections. Rather than using multiple parts to connect pieces, Stainless steel threaded bends are rimmed with matching grooves, one on the outside and one on the inside of a piece. Because the sections screw together, assembly is a breeze.
When compared to flanges, these grooved connections have several advantages and disadvantages. For starters, they frequently tolerate pump vibrations better. Because they do not use bolts, their connections will never need to be retightened.
Overall, Gi-threaded long bends are significantly less expensive than flange connections. It is primarily due to the numerous parts and configurations of flanges. Of course, their operational inflexibility offset the low cost of grooved parts. Threads are only found in a few low-pressure utility applications for a reason.
Check weight chart, dimensions, and pressure rating of Bsp male threaded long radius bend
How to manufacture gi threaded long bend?
The ideal method to create a long bend in your gi-threaded pipes is by Induction Bending. Induction Bending is a controlled process of creating Gi threaded long bend.
The process involves local heat application with a high frequency induced by the electrical power. The threaded bends are made using an Induction Bending Pipe, which has an induction coil that heats the section of the pipe to be bent and a pivot arm that holds the pipe.
Buy carbon steel threaded bend 90 degree with MTC & test reports, check GI screwed long bend price list
How to prevent stainless steel threaded bend corrosion?
- It is an indication of structural or pipe corrosion.
- Keep Threaded bend 90 degrees Clean. When metals are exposed to corrosive bacteria, microbiologically induced corrosion (MIC) occurs.
- Cleaning pipes to prevent MIC is a good idea, especially if they regularly come into contact with sulfides.
- Protective linings or special coatings can protect pipes and other surfaces.
- Using a restraint is an effective way to prevent crevice corrosion.
Male threaded long radius bend 90 degree with 100% radiography test report as per ASME B16.11
What are the applications of male threaded long radius bend 90 degree?
At the right angle bend of the pipe, the elbow is primarily used to connect two equal diameters Threaded bend pipes perpendicular to each other, and the different diameter elbow is connected with two different diameters perpendicular to each other so that the vertical pipes can be effectively and reasonably linked together.
These wrought copper steel elbows make a Threaded 90-degree bend angle connection between a copper pipe and a copper fitting. Made to ASTM and ANSI specifications from commercial grade C12200 alloy, which is used by leading copper pipe fitting manufacturers.
Looking to switch manufacturers? Obtain quotes for a female threaded long radius bend and compare it to your current importer’s revised cost
Advantages of bsp male threaded long radius bend
Long-radius elbows have a few advantages over short-radius elbows. Furthermore, these longer elbows are used based on the fluid or substance passing through the Female threaded long radius bend 90 degrees; gasses and some liquids require less resistance, which a long elbow provides.
Other benefits include:
- When long-radius elbows are used, the pressure drop within the pipe is less dramatic. It is perfect for gas pipelines and food and beverage piping.
- Long elbows reduce the risk of backups or clogs by creating less resistance.
