Titanium grade 2 tube fittings
ASTM B348 grade 2 compression fittings suppliers in UAE
ASTM standard of Titanium grade 2 compression fittings
| ASTM/ ASME | |
|---|---|
| Bar stock |
|
| Forging |
|
Listed only quality & verified SB 348 gr 2 male connector and CP grade 2 titanium instrumentation fittings suppliers in Middle East countries
Titanium grade 2 tube fittings specification
| Commercially pure grade 2 titanium bulkhead union sizes in Inch | Titanium ASTM B348 gr2 instrumentation tube fittings sizes in mm | Shapes of Titanium cp grade 2 ferrule fittings |
|---|---|---|
|
|
|
| Swagelok alternative & equivalent CP grade 2 titanium fittings | ASME SB 348 gr 2 ferrule fittings temperature range | Titanium cp grade 2 double ferrule fittings manufacturing techniques |
|
|
|
| Ends | Pressure Rating | Titanium ASTM B348 gr2 fittings connection type |
|
|
|
| Meet International Standard | Other trade name / relevant products | Titanium grade 2 hydraulic fittings testing |
|
Above listed ASME SB 348 gr 2 ferrule fittings suppliers & manufacturers exports tested material to Botswana, |
|
| Grade 2 titanium flare fittings thread specification | Medium | Standard tagging & marking on TI CP grade 2 single ferrule fittings |
|
|
|
| Titanium grade 2 hydraulic fittings design standard | Pure titanium gr 2 double ferrule fittings configuration | Free Sample |
|
|
|
| Quality compliance & inspection | Titanium cp grade 2 double ferrule fittings application & uses | |
|
|
Suitable environment & titanium grade 2 adapter fittings properties
Buy directly from ASME SB 348 gr 2 ferrule fittings manufacturers at a lower cost in Dubai, titanium grade 2 hydraulic fittings are equivalent to Swagelok/ Parker
| Grade | ASTM B348 grade 2 |
|---|---|
| Environment |
|
| Silicon | 0.3 % |
| Ni | 49% –51% |
| PREN (Pitting Resistance Equivalent Number) | 3.7035 |
CP grade 2 titanium instrumentation fittings material of construction
Grade 2 titanium flare fittings and pure titanium gr 2 pneumatic fittings for hydraulic fluids system & extreme conditions
| Component | Material | Marking |
|---|---|---|
| 1 Nut | ASTM B348 grade 2 | Notched hex, “B348 grade 2” on face |
| 2 Back ferrule |
ASME SB 348 gr 2 | “254” or “6HN” on outer rim |
| 3 Front ferrule |
Titanium SB 348 gr 2 | “B348 grade 2” on outer rim |
| 4 Body | Titanium ASTM B348 gr2 | “B348 grade 2” on neck |
TI CP grade 2 single ferrule fittings grades and equivalent
TI CP grade 2 single ferrule fittings and SB 348 gr 2 compression tube fittings in UNF, ISO, SAE, NPT(F), BSPT, AN, NPT(M), BSPP for leak-tightness connections
| Grade | Ti Grade 2 |
|---|---|
| ASTM | B348 |
| UNS | R50400 |
| WNR | 3.7035 |
| GOST | – |
Titanium gr 2 compression fittings types for leak proof connection
TI CP grade 2 Tube To Male Pipe
- Male Elbow
- Male Run Tee
- Male Branch TeeMale Connector
- Bulkhead Male Connector
Titanium cp grade 2 Tube To Female Pipe
- Female Connector
- Female Elbow
- Female Run Tee
- Female Branch Tee
- Bulkhead Female Connector
Pure titanium gr 2 Tube To Tube Union
- Union Tee
- Union
- Reducing Union
- Bulkhead Union
- Bulkhead Reducing Union
- Union Elbow (45 & 90 Degree)
Titanium grade 2 hydraulic fittings port connector
- Male Adaptor
- Female Adaptor
- Reducer
Grade 2 titanium flare fittings component
- Back Ferrule
- Front Ferrule
- Nut
Titanium SB 348 gr 2 threaded tube fittings
- Hex Long
- Hex Reducing Coupling
- Pipe Plug
- Nipple Hex
- Reducing Nipple
- Adaptor
- Reducing Adaptor
- Reducing Bushing
- Hex Coupling
- Hex Nipple
SB 348 gr 2 male connector stock sizes
- 1/16 in.
- 1/2 in.
- 5/8 in.
- 3/4 in.
- 1 in.
- 1 1/2 in.
- 12 mm
- 16 mm
- 18 mm
- 20 mm
- 25 mm
- 1/8 in.
- 3/16 in.
- 1/4 in.
- 5/16 in.
- 3/8 in.
- 3 mm
- 4 mm
- 6 mm
- 8 mm
- 10 mm
Types of grade 2 titanium high pressure fittings
| Type | Installation description |
|---|---|
| Ti cp grade 2 bulkhead union elbow |
|
| Commercially pure grade 2 titanium cross |
|
| Titanium sb 348 gr 2 street elbow |
|
| Pure titanium gr 2 female thread elbow |
|
| Cp grade 2 titanium female run tee |
|
| Grade 2 titanium male street tee |
|
| Titanium cp grade 2 branch reducing tee |
|
| Titanium sb 348 gr 2 bulkhead union |
|
| Titanium astm b348 gr2 tube nuts |
|
Most selling list of titanium grade 2 hydraulic fittings
TI CP grade 2 Single & double ferrule fittings
- Plug
- Union
- Reducing Union
- Male Connector
- Female Connector
- Reducer
- Cap
- Butt Weld Male Connector
- Socket Weld Male Connector
- Cross
- Nut
- Back Ferrule
- Front Ferrule
- Ferrule Set
- Male Connector (JIC)
Bulkhead union adapter & connector
- Male Adapter (JIC)
- Female Adapter
- Female Gage Adapter
- Port Connector
- Reducing Port Connector
- 0-Seal Male Connector
- BSPT Male Connector
- BSPP Male Connector
- Male Adapter (NPT)
- O-Seal Male Adapter
Titanium SB 348 gr 2 instrument elbow
- Union elbow
- Male elbow
- Socket Weld Male Elbow
- 90° Positionable Male Elbow
- 45° Degree Positionable Male Elbow
- BSPP Positionable Male Elbow
- Female elbow
- 45 degree male elbow
- Butt Weld Male Elbow
Titanium ASTM B348 gr2 bulkhead fittings
- Bulkhead Union
- Bulkhead Male Connector (JIC)
- Bulkhead Reducer
- Bulkhead Union Elbow
- Bulkhead Reducing Union
- Bulkhead Male Connector (NPT)
- Bulkhead Female Connector
CP grade 2 titanium instrument tee fitting
- Male Branch Tee
- Female Run Tee
- Female Branch Tee
- Union Tee
- Reducing Union Tee
- Male Run Tee
- 90° Positionable Male Branch Tee
- Positionable Male Run Tee
Working pressure of titanium grade 2 hydraulic fittings
| Swagelok End Connection Size | ASME B31.1 Maximum Allowable Working Pressures | ASME B31.3 Maximum Allowable Working Pressures | ||
|---|---|---|---|---|
| Up to 100°F | At maximum temperature 600°F(315°C) | Up to 100°F | At maximum temperature 600°F(315°C) | |
| 1/4 Inch | 7735 psig | 3480 psig | 9100 psig | 4095 psig |
| 3/8 Inch | 4930 psig | 2218 psig | 5800 psig | 2610 psig |
| 1/2 Inch | 3570 psig | 1606 psig | 4200 psig | 1890 psig |
| 6 mm | 510 bar | 229 psig | 600 bar | 270 psig |
| 10 mm | 289 bar | 130 psig | 340 bar | 153 psig |
| 12 mm | 238 bar | 107 psig | 280 bar | 126 psig |
Grade 2 titanium flare fittings thread types
| N = NPT(1)/National Pipe Taper | ANSI B1.20.1 |
| K = BSP/ISO Taper | BS21, ISO7/1 |
| R = BSP/ISO Parallel | BS2779, ISO 228/1+2, DIN 3852 FORM A(2) |
| BR = BSP/ISO Parallel | BS2779, ISO 228/1+2, DIN 3852 FORM B(3) |
| M = Metric Thread | ISO 6149-2 |
| R-ED = BSPP/ISO Parallel | BS2779, ISO 228/1+2, DIN 3852 with elastic sealing washer(4) |
| GC = BSPP Gauge Connector | B2779, ISO 228/1+2, DIN 3852 |
Titanium grade 2 hydraulic fittings composition
| Element | Weight (%) |
|---|---|
| Nitrogen | 0.03 max |
| Carbon | 0.08 max |
| Hydrogen | 0.015 max |
| Iron | 0.3 max |
| Oxygen | 0.25 max |
| Titanium | Remainder |
Titanium ASTM B348 gr2 compression fittings
| Standard | Titanium cp grade 2 compression tube fittings size range | Threads |
|---|---|---|
|
|
|
| Equivalent to | Types of CP grade 2 titanium compression fittings | Titanium Tube Fittings Grades |
|
|
| Size range | TI CP grade 2 single ferrule fittings threads | Equivalent to |
|---|---|---|
|
|
|
|
Types of titanium cp grade 2 double ferrule fittings end connection |
Titanium ASTM B348 gr2 ferrule tube fittings types, & components |
|
|
|
Commercially pure grade 2 titanium hydraulic fittings
| Size | Titanium grade 2 hydraulic fittings threads | Titanium grade 2 hydraulic fittings style |
|---|---|---|
|
|
|
| Types of titanium grade 2 hydraulic fittings | Equivalent to | |
|
|
ASME SB 348 gr 2 pneumatic fittings
| Standard | Size | Pure titanium gr 2 pneumatic fittings thread types |
|---|---|---|
|
|
|
| Types of pure titanium gr 2 pneumatic fittings | Equivalent to | |
|
|
Titanium grade 2 flare fittings
| Size | Standard | Meet standard |
|---|---|---|
|
|
|
| Grade 2 titanium flare fittings applications | Types of TI CP grade 2 flared tube fittings | Most popular grade 2 titanium flare fittings |
|
|
|
| Components & body parts | Grade 2 titanium flare fittings threads | Equivalent to |
|
|
|
Table of Content