Tri-Clamp Mini Gaskets

Tri-Clamp-Mini Gaskets

Worried on sufficing your daily standards and not getting the most appropriate product choice? Then why not opt for Tri-clamp mini gaskets. This is mainly because they are used widely by sanitary process industries, who major accept this product to seal connection clamps in sanitary pipelines.

Not only this, it has a design which is so elegant and top-notch, which makes it so suitable enough; that it can cover any applications. Even petrochemical applications, for instance, use tri-clamp EPDM sanitary gasket. But one very important factor to be kept in mind is that this product is free of ADI. It means Animal Derived Ingredients. In this way, customers are offered user-friendly and efficient services. Not only this, they resist the fluid systems chemically, to prevent having colossal impact on the physical properties. With respect to gasket surface sealing, it does not promote corrosion.

Verified Supplier

Verified stockists and suppliers

Well-known mini tri-clamp EPDM sanitary gasket suppliers in UAE

Specification of Tri-clamp mini gaskets

Size Mini Series Tri-clamp gasket Tri-clamp mini gaskets thickness
  • 1/4″
  • 3/8″
  • 1/2″
  • 3/4″
  • DN8 to DN18


  • 1mm
  • 1.5mm
  • 2mm
  • 3mm
  • 4mm
  • 5mm
  • 6mm
  • 8mm
  • 10mm
  • 12mm

Please contact below listed Tri-clamp mini gaskets suppliers in UAE to buy the stock of thickness and sizes

Tri-clamp mini gaskets Material Mini Size Sanitary Gaskets uses Temperature
  • EPDM
  • Buna N (Nitrile)
  • PTFE (Teflon)
  • Platinum Silicone
  • Viton
  • FKM Fluoroelastomer
  • Tuf-Flex
  • Food processing
  • Dairy
  • Biotech
  • Brewing
  • Beverage
  • Sanitary pipe lines
  • Pharmaceutical sector
  • EPDM : -58°F to +302°F
  • PTFE : -13°F to +482°F
  • Viton : 86°F to +482°F
  • Silicone : -130°F to +392°F
  • TFM : -328°F to +500°F
  • Peek : -418°F to +482°F
Manufacturing Standard Tri-clamp mini gaskets face We can arrange third paty inspection by below listed agencies in different countries such as India, Japan, Taiwan
  • DIN32676
  • ISO2852
  • ISO1127
  • ASME B16.5
  • Full-Face
  • IBC
  • Det Norske Veritas
  • SGS
  • Lloyd’s register
  • Bureau veritas
  • IBR
Service Gasket inner diameter Working pressure
  • Our vendors will provides certification for Tri-Clamp Mini Gaskets you purchase. This service makes it simple for end customers to validate products.
  • 0.19 inch to 0.65 inch
  • 55 bar

Buy tri-clamp sanitary PTFE mini gaskets for industrial uses at a genuine price

Refer list of verified mini tri-clamp gaskets manufacturers in Dubai, and also view the benefits

Get connected with sanitary mini tri-clamp type 1 standard gaskets stockists & importers in the Middle East and Asia with mill test reports
Find complete information about sanitary mini clamp gasket types and mini clamp tri clover gaskets applications

This benefit comes not only for a particular size, but comes for all size ranges that lies between 1/4″-3/4″. Not only this, the internal diameter also ranges between 0.18″-0.62″. But there are cases, where specific dimensions are aspired at cost affording prices. Then it is highly suggested to either check for other products, or approach only those suppliers, who charge accurate pricing for tri-clamp sanitary PTFE mini gaskets.

But one must be very clear also with the operating environmental conditions too. For modern scenarios, it is suitable for use case within the temperature range of -30°F to 300°F.

  • On the other hand, customers are also advised to even get brief idea on the installation process linked to mini tri-clamp gaskets.
  • For removal of residue, clean the area prior installing a new gasket.
  • Next, one must centre gasket to a flange. While doing this keep in mind that the fitting size for sanitary mini tri-clamp type 1 standard gaskets is correct.
  • During this, be sure that the gaskets do not get slipped when adding a clamp.

Adding to this, these beneficial aspects are also because of the employed material that are used for making sanitary mini clamp gasket. Keeping this in mind, below are the listed materials:

  • Buna N
  • FKM fluor elastomer
  • EPDM
  • Tuf-flex
  • PTFE
  • Tuf-steel
  • Platinum silicone

At last, to resolve one of the most major concern of customers, confidentiality of mini clamp tri clover gaskets is achieved only by demanding for the below mentioned material certification:

  • ADI free
  • cGMP guidelines
  • FDA CFR 117.1550
  • FDA CFR 177.2600
  • US Pharmacopeia Class VI certification