A286 Threaded Rod

Home > A286 Threaded Rod

A286 Threaded Rod

The A286 threaded rod comes under the Inconel superalloy grade. The A286 Threaded Rod has a stud that showcases superior strength and possesses outstanding corrosion resistance. These rods work in temperatures up to 1300 degrees F. ASME SA286 ACME Threaded Rod is ductile and non-magnetic in nature. These rods are precipitation hardened, but can also be hardened using other heat treatment processes. The Stainless steel A286 Partially Threaded Rod has excellent mechanical properties and showcase a hardness of 90 max. These rods are available in different sizes as per project requirements.

Verified Supplier

Verified manufacturers and stockists

Duplex fasteners

available 5 cars

Mumbai, India

Dalloyed Fasteners

sales@dalloyedfasteners.com
+91 7666996996

Mumbai, India

Jignesh Steel

sales@jigneshsteel.com
+91 9869357774

Mumbai, India

Neminox Steel

sales@neminox.com
+91 7021727926

Mumbai, India

Sagar Steel Corporation

sales@sagarsteel.co.in
+91 9820137788

Ajman, UAE

Petron Steel Middle East FZC

info@petronsteel.ae
+971 557552893

Table of Content

A286 stainless steel studs specification
A286 stainless steel stud types
Strength of A286 threaded rod
UNS S66286 double end stud bolts equivalent standard
A286 stainless welding studs chemical composition
UNS 66286 UNC stud bolt mechanical properties
A286 660 fully threaded rod ACME thread chart

A286 steel studs and ASTM A286 stud bolt suppliers in UAE

A286 stainless steel studs specification

A286 Threaded Rod Specifications

A286 stainless steel threaded rod sizes	UNS S66286 stud bolt size chart	A286 alloy stud bolts and nuts length
A286 steel threaded rod diameter: 2-56 to 2″ 5 – 60mm Alloy A286 tap end stud bolts all thread: ¼” to 4″ Length: up to 61″	A286 cres fully threaded stud: ¼” to 2 ½” Length: up to 61″	1 meter 2 meter 3 meter 3 feet 6 feet 10 feet 12 feet
A286 stainless welding studs grades	EN 1.4980 metric threaded rod ASTM standard	UNS 66286 UNC stud bolt temperature range
Inconel A286 UNS S66286 EN 1.4980	ASTM A286	1300°F (704°C)
A286 steel threaded studs thread class	Nickel alloy A286 stud bolt types	A286 cres threaded rod types
Class 1A (Loose fit) Class 2A (Medium fit) Class 3A (Tight fit) 5 CSF 5 ONF 5 HF 2G 3G 4G 6G 8G custom Contact above A286 threaded rod suppliers & stockholders for large-diameter	A286 alloy reduced shank stud bolts A286 cres tap end stud bolts EN 1.4980 hub studs DIN 1.4980 blade studs Inconel A286 continuous threaded stud bolts UNS 66286 welding studs A286 stainless steel double end stud bolts 1.4980 steel UNC stud bolt Nickel alloy A286 knurled stud bolt A286 steel exhaust stud bolt UNS S66286 fully threaded studs	A286 steel right and left hand threaded rod UNS S66286 fully threaded rod A286 cres double ended threaded rod A286 stainless steel tap end threaded rod EN 1.4980 extra fine threaded rod All Thread rods Get best price for South Africa, Nigeria,USA, UAE, Oman, Saudi Arabia & Qatar from genuine A286 threaded rod suppliers, call now for best quote
A286 stainless steel studs thread diameter	Threads directions of nickel alloy A286 eye stud bolt	A286 cres fully threaded studs thread start
UNC threads #4 to 4″ UNF threads #4 to 1-1/2″ 8 UN threads 1-1/8 to 4″ Acme threads 1/4 to 5″	Right Hand Left Hand	Single-start Two-start Multiple-start
A286 threaded rod required testing & certificates	1.4980 steel continuous threaded stud bolts thread types	A286 stud bolt end
MTC 3.1 Tensile test Charpy V-notch test Rockwell / Brinell Hardness test Microstructure Analysis Impact testing	Fine Thread (UNF) 8-Thread Series (8UN) Coarse thread (UNC) 12-thread series (12-UN) Metric coarse BSF UNEF UNJ Metric fine ACME Trapezoidal	Sheared end Chamfer end Semi-cone point Half point Cone point Gimlet point Chisel point 45 degree angle cut Milled end
A286 stainless welding studs meet standards	Alloy A286 tap end stud bolts applications	A286 cres fully threaded studs surface treatments
IS ISO DIN 975 ASME B16.5 ASME B1.1 ASME B1.5 DIN 2510 DIN 103 DIN 13-52 ASME B18.31.2 DIN 976 ASTM A722 BS DAST 021	Rigs Flange joints Petrochemical plants Bridge construction Offshore Automotive industry Aerospace Solar plants Ship building Wind mills	PTFE / Teflon Mechanical Zinc Nickel Plain Clear Zinc Plated Cadmium Oil Nickel Plated Yellow Zinc Plated Hot Dip Galvanized Black Oxide Green Finish Black Finish
DIN 1.4980 shear stud bolt manufacturing method
Cold Forged Hot Forged CNC machined

Check advantages, applications, sizes, and price of A286 threaded bar and tie rod in Dubai as per DIN 938 & DIN 976

A286 stainless steel stud types

A286 Threaded Rods

A286 Full Threaded Stud

A286 stainless steel Full Thread Stud
A286 steel Single End Stud
UNS S66286 Unthreaded Stud (Blank)
Nickel alloy A286 Double End Stud
A286 alloy Tap End Stud
1.4980 steel Radius End Stud
EN 1.4980 Chisel Point Stud
UNS 66286 Reducing Stud

Strength of A286 threaded rod

Strength	Ksi	Mpa
Tensile	145,000	1000
Yield	105,000	724

UNS S66286 double end stud bolts equivalent standard

A286 threaded rod standard type	S66286 equivalent standard	Origin of Country
Material	Alloy A286	USA
UNS	UNS S66286	USA
DIN, WNr	1.4980	Germany
European steel name	–	Europe
EN steel number	1.4980	Europe
BS	–	England
SS	–	Sweden

A286 stainless welding studs chemical composition

Elements	Molybdenum, Mo	Chromium, Cr	Phosphorous, P	Silicon, Si	Nickel, Ni	Manganese, Mn	Carbon, C	Sulfur, S	Nb+Tc
Compositions(%)	8.0(min)-10.0(max)	20.00(min)-23.00(max)	0.015(maximum)	0.5(maximum)	Balance	0.5(maximum)	0.10(maximum)	0.015(maximum)	3.15(min)-4.15(max)

UNS 66286 UNC stud bolt mechanical properties

Temperature ( °F )	Ultimate Tensile ( ksi )	Yield Strength at 0.2 % Offset ( ksi )	Elongation %
Room Temp .	144.0	84.0	44.0
1400	78.0	59.0	59.0
1A 286	40.0	39.0	117.0
800	132.0	61.0	45.0
400	134.0	66.0	45.0
A 286	132.0	63.0	42.5
1000	130.0	61.0	48.0
1200	119.0	60.0	34.0

A286 Threaded Rod Properties

A286 660 fully threaded rod ACME thread chart

Designation ACME	Size Decimal	TPI	Tol. Class	Major Dia.
Designation ACME	Size Decimal	TPI	Tol. Class	Maximum	Minimum
1/4-16	0.25	16	2G	0.2500	0.2450
1/4-16	0.25	16	3G	0.2500	0.2450
1/4-16	0.25	16	4G	0.2500	0.2450
1/4-16	0.25	16	5G	0.2500	0.2450
5/16-14	0.3125	14	2G	0.3125	0.3075
5/16-14	0.3125	14	3G	0.3125	0.3075
5/16-14	0.3125	14	4G	0.3125	0.3075
5/16-14	0.3125	14	5G	0.3125	0.3075
3/8-12	0.375	12	2G	0.3750	0.3700
3/8-12	0.375	12	3G	0.3750	0.3700
3/8-12	0.375	12	4G	0.3750	0.3700
3/8-12	0.375	12	5G	0.3750	0.3700
7/16-12	0.4375	12	2G	0.4375	0.4325
7/16-12	0.4375	12	3G	0.4375	0.4325
7/16-12	0.4375	12	4G	0.4375	0.4325
7/16-12	0.4375	12	5G	0.4375	0.4325
1/2-10	0.5	10	2G	0.5000	0.4950
1/2-10	0.5	10	3G	0.5000	0.4950
1/2-10	0.5	10	4G	0.5000	0.4950
1/2-10	0.5	10	5G	0.5000	0.4950
5/8-8	0.625	8	2G	0.6250	0.6188
5/8-8	0.625	8	3G	0.6250	0.6188
5/8-8	0.625	8	4G	0.6250	0.6188
5/8-8	0.625	8	5G	0.6250	0.6188
3/4-6	0.75	6	2G	0.7500	0.7417
3/4-6	0.75	6	3G	0.7500	0.7417
3/4-6	0.75	6	4G	0.7500	0.7417
3/4-6	0.75	6	5G	0.7500	0.7417
7/8-6	0.875	6	2G	0.8750	0.8667
7/8-6	0.875	6	3G	0.8750	0.8667
7/8-6	0.875	6	4G	0.8750	0.8667
7/8-6	0.875	6	5G	0.8750	0.8667
1-5	1	5	2G	1.0000	0.9900
1-5	1	5	3G	1.0000	0.9900
1-5	1	5	4G	1.0000	0.9900
1-5	1	5	5G	1.0000	0.9900
1 1/8-5	1.125	5	2G	1.1250	1.1150
1 1/8-5	1.125	5	3G	1.1250	1.1150
1 1/8-5	1.125	5	4G	1.1250	1.1150
1 1/8-5	1.125	5	5G	1.1250	1.1150
1 1/4-5	1.25	5	2G	1.2500	1.2400
1 1/4-5	1.25	5	3G	1.2500	1.2400
1 1/4-5	1.25	5	4G	1.2500	1.2400
1 1/4-5	1.25	4	5G	1.2500	1.2400
1 3/8-4	1.375	4	2G	1.3750	1.3625
1 3/8-4	1.375	4	3G	1.3750	1.3625
1 3/8-4	1.375	4	4G	1.3750	1.3625
1 3/8-4	1.375	4	5G	1.3750	1.3625
1 1/2-4	1.5	4	2G	1.5000	1.4875
1 1/2-4	1.5	4	3G	1.5000	1.4875
1 1/2-4	1.5	4	4G	1.5000	1.4875
1 1/2-4	1.5	4	5G	1.5000	1.4875
1 3/4-4	1.75	4	2G	1.7500	1.7375
1 3/4-4	1.75	4	3G	1.7500	1.7375
1 3/4-4	1.75	4	4G	1.7500	1.7375
1 3/4-4	1.75	4	5G	1.7500	1.7375
2-4	2	4	2G	2.0000	1.9875
2-4	2	4	3G	2.0000	1.9875
2-4	2	4	4G	2.0000	1.9875
2-4	2	4	5G	2.0000	1.9875
2 1/4-3	2.25	3	2G	2.2500	2.2333
2 1/4-3	2.25	3	3G	2.2500	2.2333
2 1/4-3	2.25	3	4G	2.2500	2.2333
2 1/4-3	2.25	3	5G	2.2500	2.2333
2 1/2-3	2.5	3	2G	2.5000	2.4833
2 1/2-3	2.5	3	3G	2.5000	2.4833
2 1/2-3	2.5	3	4G	2.5000	2.4833
2 1/2-3	2.5	3	5G	2.5000	2.4833
2 3/4-3	2.75	3	2G	2.7500	2.7333
2 3/4-3	2.75	3	3G	2.7500	2.7333
2 3/4-3	2.75	3	4G	2.7500	2.7333
2 3/4-3	2.75	3	5G	2.7500	2.7333
3-2	3	2	2G	3.0000	2.9750
3-2	3	2	3G	3.0000	2.9750
3-2	3	2	4G	3.0000	2.9750
3-2	3	2	5G	3.0000	2.9750
3 1/2-2	3.5	2	2G	3.5000	3.4750
3 1/2-2	3.5	2	3G	3.5000	3.4750
3 1/2-2	3.5	2	4G	3.5000	3.4750
3 1/2-2	3.5	2	5G	3.5000	3.4750
4-2	4	2	2G	4.0000	3.9750
4-2	4	2	3G	4.0000	3.9750
4-2	4	2	4G	4.0000	3.9750
4-2	4	2	5G	4.0000	3.9750
4 1/2-2	4.5	2	2G	4.5000	4.4750
4 1/2-2	4.5	2	3G	4.5000	4.4750
4 1/2-2	4.5	2	4G	4.5000	4.4750
4 1/2-2	4.5	2	5G	4.5000	4.4750
5-2	5	2	2G	5.0000	4.9750
5-2	5	2	3G	5.0000	4.9750
5-2	5	2	4G	5.0000	4.9750
5-2	5	2	5G	5.0000	4.9750

Find specialized and verified suppliers of ASTM A286 allthread and A286 stainless steel double end threaded rod in Middle East countries, view torque chart & tensile strength

The tensile strength of A286 allthread is calculated using the formula tmin x a = Stensile. This procedure allows users to calculate the load the ASTM A286 Allthread can take.

A A286 steel stud bolt can be easily tightened from both ends using nuts, creating strong sealing. The ASME SA286 Stud Bolt has accurate torque values and resists vibration or torsion in the system. These A286 stainless steel stud bolts are prone to failure under extreme stress or pressure.

The ASTM A286 threaded bar is designed with an excellent chemical composition. This gives Alloy A286 Threaded Bar good resistance to corrosive affluents in the petrochemical industries. The superior strength of the bars allows them to affix different materials in their desired position.

View A286 tap-end studs and ASME SA286 fully/ partially threaded rod chemical composition, tensile strength & connections

Two A286 fully threaded rods can be joined using coupling nuts. You can join two external DIN 1.4980 Fully Threaded Studs if they are of the same diameter. If the dimensions of these studs are different, then you can use a reducer nut to affix them in place.

Are you searching your specific size in ASME SA286 ACME threaded rod? Also check difference between A286 tap end studs and double end studs

A286 studs are designed in tap and double end studs, and both have varying features. The SA286 Double End Threaded Rod is a device that is equally threaded on both ends. This allows it to securely accommodate a nut in place. A286 Tap-end Studs have a shorter thread length on one side with a longer thread length on the other.