Tungsten threaded is a fastener that is threaded across its length. Tungsten Threaded Rod is a versatile fastener having superior resistance to corrosive affluents. These rods are characterized having an ultra high density and strength. The Threaded Tungsten Rod requires to be affixed with two nuts and washers for strong sealing. These rods have higher metal mass and tolerances. These Tungsten Wading Boot Studs have superior mechanical properties and can be fastened following standard methods. These studs can be easily dismantled without damaging the Tungsten Barrel Threads or other equipment.
Tungsten carbide studs suppliers in UAE
Tungsten threaded rod specification
| Tungsten molybdenum alloy threaded rod sizes | Niobium tungsten alloy stud bolt size chart | ASTM B777 class 1 double end stud bolts length |
|---|---|---|
|
|
|
| Tungsten threaded bar grades | Niobium tungsten alloy tie rod ASTM standard | ASTM B777 class 2 fully threaded studs temperature range |
|
|
|
| Tungsten carbide tire studs thread class | ASTM B777 class 1 stud bolt types | HA 195 threaded rod types |
Contact above tungsten threaded rod suppliers & distributors for high-pressure environments |
|
Check price with genuine tungsten threaded rod suppliers in UAE, quick delivery to USA, UAE, South Africa, Nigeria, Oman, Saudi Arabia & Qatar |
| HA 190 tap end threaded rod thread diameter | Threads directions of tungsten fully threaded rod | ASTM B777 class 4 continuous threaded stud bolt thread start |
|
|
|
| Tungsten steel all-thread required testing & certificates | Niobium tungsten alloy tie rod thread types | ASTM B777 class 4 continuous threaded stud bolt end |
|
|
|
| Tungsten molybdenum alloy tie bolt meet standards | ASTM B777 class 3 acme threaded rod applications | Niobium tungsten alloy tie rod surface treatments |
|
|
|
| ASTM B777 class 4 continuous threaded stud bolt manufacturing method | ||
|
Common Types of Tungsten alloy stud
Recommended nuts for tungsten molybdenum alloy stud bolts
| Flange material | Stud bolts | Nuts |
|---|---|---|
| Tungsten | ASTM625 | ASTM625 |
Niobium tungsten alloy tie rod chemical composition
| Designation | Tungsten Content | Impurity Elements Content | Ni content, wt.% | Fe content, wt.% | Density, g/cm3 | |
| Total | Each | |||||
| WAL1, WAL2 | ≥99.95% | ≤0.05% | ≤0.01% | – | – | – |
| W1 | ≥99.95% | ≤0.05% | ≤0.01% | – | – | – |
| W2 | ≥99.92% | ≤0.08% | ≤0.01% | – | – | – |
| ET95 | 95% | – | – | 3.5% | 1.5% | 18% |
| ET95NM | 95% | – | – | 4.4% | 0.6% | 18% |
ASTM B777 class 4 continuous threaded stud bolt mechanical properties
| Grade | HA 190 | HA 1925 | HA 195 | HE 390 | HE 3925 | HE 395 | HE 397 | |
|---|---|---|---|---|---|---|---|---|
| Aerospace industry standards | ||||||||
| Typical properties* | Units | |||||||
| Tungsten | Nominal % | 90 | 92.5 | 95 | 90 | 92.5 | 95 | 97 |
| Binder | Ni/Cu | Ni/Cu | Ni/Cu | Ni/Fe | Ni/Fe | Ni/Fe | Ni/Fe | |
| Nominal density | g/cm3 lb/in3 | 17.1 0.62 | 17.5 0.63 | 17.9 0.65 | 17.1 0.62 | 17.5 0.63 | 18.1 0.65 | 18.5 0.67 |
| 0.2% proof stress | MPa ksi | 675 100 | 650 95 | 680 100 | 645 95 | 645 95 | 660 95 | 660 95 |
| Tensile strength | MPa ksi | 805 116 | 830 120 | 805 116 | 875 126 | 900 130 | 910 131 | 915 132 |
| Elongation on 25mm (1) | % | 7 | 9 | 4 | 25 | 27 | 22 | 12 |
| Hardness | HRC | 24 | 24 | 24 | 27 | 24 | 24 | 25 |
Refer to the dimensions, tension strength and sizes for threaded tungsten rod and stud bolts.
ASTM B777 class 3 Threaded Rod Grade Chart
Tungsten Threaded Rod Dimensions
Why depend on the current supplier? Get prices from a various of trusted importers of tungsten steel all-thread, then get tungsten carbide tire studs at a cost-effective price with MTC reports.
A tungsten threaded road can range in sizes from 4mm to 600mm. If you want customized sizes, get in touch with a reliable manufacturer
Tungsten stud bolts are recognized for their superior tensile strength in the industry. Generally, Tungsten Stud Bolts have a nominal tensile strength of 94000psi.
UNC and UNF are two types of thread symbols that determine the number of threads per inch in a standard gauge. The UNF Tungsten Studs have a smaller helix angle with a smaller pitch with more teeth when compared to UNC standard threads. The UNF Tungsten Carbide Studs are therefore referred to as fine threads, while UNC threads are called as coarse threads. These features give the UNC Tungsten Carbide Tire Studs more resistance than UNF threads.
View to the most recent price list of tungsten carbide threaded rod and barrel threads in the Dubai. Check its disadvantages
The tungsten carbide threaded rod becomes dull after repeated exposures and is very difficult to sharpen. A Tungsten Carbide Threaded Rod may also loosen under extreme stress and vibrations. Further, these rods may corrode in highly rough and toxic environments after prolonged exposure.
Without MTC or Ultrasonic test results, do not accept orders for tungsten studs and wading boot studs. Refer benefits
A tungsten all-thread fastener can be easily screwed with relative ease in a small amount of time. The Tungsten Steel All-thread grade has excellent corrosion resistance and can stabilize and maintain different applications. They can be used to connect objects to wood, plastic, concrete, steel, and other material.
Table of Content