What are stainless steel 904l forged fittings?
SA182 F904L is a type of austenitic stainless steel. It is notably softer than 316L material. But due to added molybdenum in its chemical composition, the Stainless Steel 904L Forged Fittings offer superior resistance to localized attacks. It can also show great resistance to chloride attacks and reducing acids. Thus, the SS 904L Forged Fittings are ideal for use in moderate to high corrosion resistance in a wide range of process environments. They show better performance than other grades of austenistic steel due to the higher alloying content of nickel and molybdenum. The 904L Stainless Steel Forged Fittings show great durability, which increases its effectiveness and make it price-worthy over time (even though it has high initial cost). The SS DIN 1.4539 forged fittings are found in chemical process industry especially in the production equipment of phosphate-based fertilizers.
To ensure a tight seal, multiple thread sizes are offered for SS 904l threaded elbow and ASTM A182 F904L socket weld tee as per ASME B16.11 standard
Is 904l ss socket weld fitting are corrosion resistance?
The SS 904L Socket Weld Fittings are corrosion resist in a wide range of process environments.
Always request the necessary test reports for stainless steel 904l socket weld fittings and UNS N08904 threaded plug/ nipple in the purchase order.
How do you fit a AISI 904L socket weld elbow?
To fit UNS N08904 socket weld elbow, a pipe is inserted into the recess of the SA 182 F904L Fittings. However, a gap of 1/16” should be allowed to maintain. This is to allow for thermal expansion of the pipe under welding pressure.
Check the price per kg of 904L ss threaded fittings in Dubai before making a direct purchase from the top manufacturers of DIN 1.4539 socket weld half/ full coupling at reasonable prices in the UAE.
What are the various thread type standard of 904L ss threaded elbow?
The thread type standard for ASTM A182 F904L Forged Fittings like threaded elbow are UN/UNF, NPT/NPTF, BSPP (BSP Parallel), BSPT (BSP Tapered), and metric parallel/metric tapered.
Custom machining and sizes are available for AISI 904L forged cap/ tee and ASME SA182 F904L threaded 90 degree elbow.
How do you harden 904l stainless steel socket weld coupling?
The 904L Ss Socket Weld Fittings can be hardened using thermal treatment. The 904L Stainless Steel Socket Weld Fittings can be solution heat treated within the temperature range of 1090 degrees C to 1175 degrees C, followed by rapid cooling procedure.
SS 904l socket weld union and SUS 904l threaded street elbow are used for non-critical applications such as Petroleum, Oil and gas
Which industries uses ss 904l threaded fittings?
The Stainless Steel 904L Threaded Fittings are used in several industries like pulp and paper, gas scrubbing plants, seawater cooling device, and so on.